Slips Away Anti-Slip Tape - White

While water-resistant, it is best suited for areas that get wet but are not continuously submerged. For prolonged submersion, edge sealing is highly recommended.

The tape adheres best to smooth, clean surfaces. Textured surfaces may offer less reliable adhesion. Test in an inconspicuous area first.

With proper installation and care, the adhesive is designed for long-term use. Longevity can be extended by ensuring a clean application surface and sealing the edges in demanding environments.

The white surface is easy to clean. While any light color can show marks, its non-porous nature allows for simple wipe-downs to remove most stains.

While it can be removed, it is generally not recommended for reapplication as the adhesive may lose its effectiveness.

Use a flexible, waterproof sealant compatible with the surface material. Consult sealant manufacturer guidelines for marine or wet area applications.

Ensure the surface was thoroughly cleaned and completely dry before application. Reapply pressure to the tape, paying special attention to the edges. Consider using a sealant on the edges for added adhesion.

This can occur if air is trapped during application. Try to lift the edge carefully and reapply, smoothing out the air. If bubbles are significant, you may need to remove and reapply the tape to a clean surface.

This often happens in high-moisture or high-traffic areas. Clean the edge, dry thoroughly, and apply a small amount of appropriate edge sealant to secure it. Ensure the initial surface preparation was optimal.