Pro-Ject Connect it RCA E - Silver

It is designed as a high-quality stereo interconnect cable, primarily for turntables, to ensure a neutral and lossless signal transmission between the turntable and your audio system.

The cable features high purity oxygen-free copper (HP-OFC) conductors and gold-plated brass connectors for optimal conductivity and durability.

The cable has 2 individually shielded conductors per channel, which helps to protect the audio signal from external interference and noise.

While it is optimized for turntables, its standard RCA connectors make it compatible with any component featuring RCA line-level inputs and outputs. However, its specific design focuses on the needs of vinyl playback.

The Pro-Ject Connect it RCA E cable is 1.23 meters (approximately 4 feet) long.

No, this is an RCA interconnect cable. Turntables typically require a separate ground wire to be connected between the turntable and the amplifier or phono preamplifier to prevent hum.

Gently wipe the gold-plated connectors with a soft, dry, lint-free cloth. Avoid using any liquids or abrasive materials.

Check that both ends of the RCA cable are securely plugged into the correct input/output jacks on your turntable and amplifier/preamplifier. Ensure the turntable is properly grounded. Try a different RCA cable to rule out a cable fault.

Verify that the turntable's ground wire is connected to the ground terminal on your amplifier or phono preamplifier. Ensure the RCA cable is not running parallel to any power cables. Try repositioning the cable away from potential sources of electrical interference.

Inspect the RCA connectors for dirt or debris and clean them gently with a dry cloth. Ensure the cable is not damaged or kinked. Test with a different audio source or cable to confirm if the issue lies with the cable.