Best current price£120.48from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£120.48Visit shop Q Max Square Sheet Metal Punch 1In 5052587026909
Visit shop
B&Q£124.73Visit shop B&Q - Q Max Square Sheet Metal Punch 1In
Visit shop2 offers from £120.48 - £124.73
View price history by clicking the chart icon.
This Q.Max Sheet Metal Punch is designed for professionals and DIY enthusiasts who need to create clean, square holes in sheet metal up to 16 gauge quickly and efficiently. Its primary benefit is producing burr-free holes that require no additional finishing, saving time and effort. A caveat is that the punch key must be ordered separately, which is essential for operation. Key features include heat-treated cutting edges for durability, a black anti-corrosive surface finish to prevent rust, and a special design for even load distribution during cutting.
| Model Part Number | Q Max |
|---|---|
| Brand | Q.Max |
This punch creates a 1-inch square hole.
The punch is designed for sheet metal up to 16 gauge thickness.
No, the punch key must be ordered separately. It needs to be a 'B Key Operated' type with a 5/16in AF size.
No, the design produces a burr-free hole that needs no extra finishing.
After use, clean the punch and apply a light coat of oil to the cutting edges and metal surfaces. Store in a dry environment.
The punch has a black anti-corrosive surface finish.
This punch is intended for sheet metal up to 16 gauge. It is not designed for hardened steel or materials significantly thicker than 16 gauge.
Ensure the sheet metal is within the 16-gauge limit. Check that the punch key is correctly installed and securely tightened. Inspect the cutting edges for dullness or damage and replace if necessary. Verify that the punch is aligned squarely with the material.
Remove the punch from the material and clear any debris from the cutting area. Ensure the material is flat and properly supported. Check that the punch key is engaging properly and not obstructed. If the material is too thick or hard, it may exceed the tool's capacity.
Confirm that the punch is positioned accurately and perpendicular to the material surface. Ensure the sheet metal is not flexing or deforming excessively during the punching process.
Clean the affected area thoroughly and apply a rust inhibitor or light oil. Ensure the tool is stored in a dry place and apply a protective oil coating before storage.
Setup: To use the Q.Max Sheet Metal Punch, ensure you have the correct 'B Key Operated' punch key with a 5/16in AF size, which must be ordered separately. Attach the key securely to the punch mechanism as per its specific design.
Compatibility: This punch is designed for use with sheet metal up to 16 gauge thickness. It requires a compatible 'B Key Operated' punch key.
Care: After each use, clean the punch surfaces to remove any metal debris. Apply a light coat of oil to the cutting edges and moving parts to prevent rust, especially during prolonged storage. Store the punch in a dry environment. Periodically check the heat-treated cutting edges for wear and the anti-corrosive finish for any damage.
