White Non Slip Plain Effect Vinyl Flooring - B&Q - 000S

The wear layer is a protective coating on the flooring that protects against scratches, scuffs, and stains. This variant has a 0.20mm wear layer.

This flooring is suitable for kitchens and living rooms.

Sweep or vacuum regularly to remove dirt and debris. Wipe up spills immediately with a damp cloth. Use a pH-neutral cleaner.

While the non-slip feature makes it suitable, confirm suitability for bathrooms with the manufacturer based on expected moisture levels.

Each sheet is 1m x 2m, covering an area of 2m².

This flooring has a cushion backing, so an additional underlayment may not be needed. However, ensure the subfloor is properly prepared and level.

Measure and cut the vinyl flooring using a utility knife and a straight edge.

Ensure the subfloor is clean and dry. Use the correct adhesive and follow the manufacturer's instructions. Allow sufficient drying time.

Ensure seams are tightly butted together. Use a seam sealer if necessary.

Use a suitable vinyl flooring repair kit to address scratches. Consider using floor protectors under furniture.

Ensure the subfloor is level before installation. Use a self-leveling compound if necessary.