Shimano Disc Brake Mineral Oil - 100 ml

Bleed your brakes when the lever feel becomes spongy or the stopping power decreases. This typically happens every 6-12 months, or as needed.

No. Only use genuine Shimano mineral oil. Other fluids can damage your brake system.

The amount of oil needed varies depending on the system, but 100ml is usually sufficient for multiple bleeds.

Store the oil in a cool, dry place away from direct sunlight.

Wipe up any spills immediately. Dispose of the used oil responsibly, following local regulations.

It is not recommended. Stick with genuine Shimano mineral oil for optimal performance.

If the lever feels spongy, or you have to pull the lever further than usual to engage the brakes, bleeding is likely needed.

Re-bleed the brakes, ensuring all air is purged from the system. Check for leaks around the calipers and levers.

Check for oil leaks, contamination on the brake pads, or worn brake pads. Bleed the brakes if necessary.

Clean the rotors with isopropyl alcohol. Inspect the brake pads for contamination or wear.