Best current price£46.16from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£46.16Visit shop Lieber Black Brushed Chrome 4 Gang 2 -Way Intelligent Dimmer 100W Led (250W Halogen/Incandescent) - Size: 146Mm X 86Mm X 2.95 Mm
Visit shop1 offer from £46.16
View price history by clicking the chart icon.
This Lieber 4 Gang 2-Way Intelligent Dimmer is designed for homeowners seeking to upgrade their lighting control with a stylish and functional solution. Its key benefit is providing versatile dimming for up to four circuits with a sleek, screwless brushed chrome finish that minimizes fingerprints. A primary consideration is the requirement to use only dimmable LED bulbs for optimal performance.
| Colour | Black |
|---|---|
| Model Part Number | SS-LL-40-LTS204-BCB |
| Brand | LIEBER |
This is a trailing edge dimmer, so it is designed for use with dimmable LED bulbs only. Ensure your LED bulbs are explicitly marked as dimmable and compatible with trailing edge dimmers.
No, this intelligent dimmer is optimized for LED technology and is not designed for use with traditional incandescent bulbs.
'2-Way' means the lights controlled by this switch can also be controlled from another switch (e.g., at the top and bottom of stairs). 'Intelligent Dimmer' refers to its advanced dimming technology (trailing edge) suitable for LEDs.
Use a soft, dry cloth. If necessary, a slightly damp cloth can be used, but avoid any abrasive cleaners or chemicals that could damage the finish.
The dimmer plate measures 146mm x 86mm x 2.95mm.
Installation is not included. Due to the electrical nature of the product, professional installation by a qualified electrician is strongly recommended.
The dimmer can handle a load of 100W for LED bulbs, which is equivalent to 250W for Halogen bulbs.
Ensure that only dimmable LED bulbs are installed and that they are compatible with trailing edge dimmers. Check that the total load does not exceed the dimmer's capacity.
Verify that power is correctly supplied to the switch. Check wiring connections with a qualified electrician. Ensure the correct type of bulbs are installed.
This typically indicates incompatible LED bulbs. Replace with bulbs explicitly stated as dimmable and compatible with trailing edge technology.
Check the wiring for the specific gang. Ensure the bulb connected to that gang is functional and compatible. Consult an electrician if issues persist.
Setup: This dimmer requires professional installation by a qualified electrician. Ensure the power is switched off at the mains before attempting any wiring. The unit is designed for standard UK back box installations.
Compatibility: This dimmer is specifically designed for dimmable LED bulbs. It is a trailing edge dimmer. Using non-dimmable bulbs, incandescent bulbs, or incompatible LED bulbs may result in poor performance, flickering, or damage to the dimmer or bulbs.
Care: Clean the dimmer faceplate with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can damage the brushed finish. The screwless design means there are no visible screws to clean around.
