Corfe Premium Range Spear Top Single Gate - Black

The 'gap size' (e.g., 914 mm) refers to the clear opening between your posts that the gate is designed to fit into. The physical dimensions of the gate itself are slightly smaller to allow clearance for the hinges and latch.

No, the gate is supplied without posts. You will need to provide suitable posts for mounting.

If the gate is not electro-galvanised, it is supplied primed black and *must* be painted after installation with a suitable metal paint system to protect it from rust and corrosion.

The fittings pack typically includes the hinges and the closing bolt mechanism. Screws for attaching these fittings are not included and must be sourced separately.

Yes, a made-to-measure service is available for this gate, allowing you to order it to specific dimensions beyond the standard offerings.

Please refer to the manufacturer's warranty information for specific details regarding the Corfe Premium Range Spear Top Single Gate.

The closing bolt is positioned on the right-hand side when the gate is viewed from the road.

Check alignment using the adjustable hinges. Ensure no obstructions are preventing the bolt from engaging. Verify the post integrity.

This indicates the protective coating (paint) is compromised or missing. Clean the affected area, apply a rust inhibitor, prime, and repaint. Ensure all surfaces of non-electro galvanised gates are painted.

Apply a penetrating lubricant to the hinge mechanism. Ensure any paint or debris is cleared from the adjustment points.

Ensure the correct type and size of screws are used and have been tightened securely into the posts and gate frame. Check that the pilot holes are appropriate for the screws.