HydroSure Flexible Garden Hose Pipe - 19mm x 50m - Yellow

This HydroSure hose features a specialized three-layer construction for enhanced abrasion and kink resistance, along with a high-visibility yellow color for safety. It is built for more demanding or professional use compared to basic garden hoses.

No, this hose has an internal diameter of 19 mm (3/4 inch) and is designed specifically for compatible 19 mm fittings. Using adapters may restrict water flow or cause leaks.

You can clean the exterior with a damp cloth and mild soap. Rinse thoroughly and allow it to dry. Avoid harsh chemicals or abrasive cleaning materials that could damage the hose surface.

This hose is designed for general garden watering. It is not certified as potable or drinking water safe.

This specific product is the 50m variant. Other lengths, such as 100m, may be available under different product codes.

It is recommended to drain the hose completely before winter storage to prevent damage from freezing. Coil it neatly and store it in a protected area, away from extreme cold and direct sunlight.

Check for kinks or severe bends in the hose. Ensure all connections are tight and free of leaks. Verify that the water source is fully open and has sufficient pressure. Clean any debris from the hose end or spray nozzle.

Disconnect and reconnect the hose fitting, ensuring it is securely tightened. Inspect the washer inside the female connector for damage or wear; replace if necessary. Ensure you are using a compatible 19 mm (3/4") connector.

While designed to be kink-resistant, severe bending can still occur. Try to lay the hose out in a straighter path. Ensure the hose has not been stored improperly in a way that has caused permanent damage to its structure.

There may be an internal blockage. Flush the hose thoroughly with water. If the problem persists, consider using a hose repair kit to check and clear any internal obstructions.