Best current price£45.99from AWD-IT.co.uk
Shopping.co.uk recommended and popular offers
AWD-IT.co.uk£45.99Visit shop Havn Black H18 180Mm Dual Fan Pack High-Airflow Large Format Pwm Cooling Fan
Visit shop2 offers from £45.99 - £50.03
View price history by clicking the chart icon.
The HAVN H18 180mm Dual Fan Pack is designed for PC enthusiasts and system builders looking to optimize case cooling through superior air movement. These large-format fans excel at delivering high-volume airflow at lower rotational speeds, resulting in a quieter acoustic profile compared to standard 120mm or 140mm fans. While they offer exceptional thermal performance, users should note that they require specific chassis mounting compatibility due to their non-standard 180mm frame size.
| Colour | Black |
|---|---|
| Model Part Number | H18 |
| Brand | HAVN |
No, these are 180mm fans and will not fit mounting holes designed for 120mm or 140mm fans.
No, the HAVN H18 180mm fans are non-RGB, focusing purely on high-performance cooling and acoustic efficiency.
PWM (Pulse Width Modulation) allows your motherboard to control the fan's speed precisely based on real-time temperature data.
Yes, but ensure your motherboard fan header can support the total amperage draw of the linked fans.
The side of the fan with the structural struts is the exhaust side. Air flows from the front (logo side) toward the struts.
Check your BIOS settings to ensure the specific fan header is set to 'PWM' mode rather than 'DC' or 'Auto'.
Verify that all mounting screws are fully tightened and that the fan is flush against the chassis panel.
Ensure the 4-pin PWM connector is securely plugged into a motherboard header that supports PWM signal communication.
Before installation, verify your case specifications to ensure support for 180mm mounting patterns; these fans will not fit standard 120/140mm mounts. When installing, use the provided screws and ensure the airflow direction (indicated by arrows on the fan frame) matches your intake or exhaust preference. To maintain optimal performance, dust the blades every 3 to 6 months using compressed air or a soft brush. Keep the system powered down during cleaning and ensure that no wires or cables obstruct the blade path, as the large diameter can easily snag loose cabling.
