Best current price£49.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£49.99Visit shop Philips Ultinon Access LED car headlight bulb (H4), ultra-compact direct-fit, 80%, 6.000K, set of 2
Visit shop1 offer from £49.99
View price history by clicking the chart icon.
The Philips Ultinon Access LED bulb is designed for drivers seeking a straightforward performance upgrade over standard halogen lighting without the need for complex wiring modifications. By providing an 80% increase in brightness and a crisp 5800K cool white light, it significantly improves nighttime visibility and provides a modern aesthetic. While this bulb is engineered for easy installation, users should always verify local automotive lighting regulations in their jurisdiction before installation to ensure full compliance with road safety laws.
| Model Part Number | 11342U2500C2 |
|---|---|
| Brand | Philips |
These bulbs use an H7 fitting, but you should verify your vehicle's specific owner manual or current bulb base to ensure compatibility.
No, the 1:1 design is made to fit existing halogen housing without modifications.
These bulbs are rated for up to 1,500 hours of continuous use.
Compliance depends on local regulations. Please check your regional automotive lighting laws before road use.
In some vehicles with sensitive light monitoring systems, the lower power draw of LEDs may trigger a warning; an external CANbus adapter may resolve this.
Use a clean, lint-free cloth. Do not use chemical solvents that could damage the housing.
Verify that the vehicle power connector is fully seated and locked into the LED bulb base.
Some vehicles with CANbus diagnostic systems may require a compatible load resistor to stabilize voltage.
Ensure the bulb is seated fully in the locking collar and that the headlight alignment was not disturbed during installation.
Installation of the Philips Ultinon Access is designed to be as simple as changing a traditional light bulb. Ensure the vehicle is off and the engine is cool before handling the headlight assembly. To install, remove the dust cap, disconnect the original bulb, and replace it with the LED unit, ensuring it is locked securely into the socket. Because the bulb is polarity-free, you do not need to worry about the orientation of the connector pins. For care, avoid touching the glass or light-emitting surface with bare fingers, as oils from the skin can degrade components; if contact occurs, clean the surface with a lint-free cloth and isopropyl alcohol.
