Best current price£149.97from Furniture123 (BID)
Shopping.co.uk recommended and popular offers
Furniture123 (BID)£149.97Visit shop Xl Joinery White Internal Primed One-Panel Fd30 Fire Door - 2040 X 726 X 44Mm - Pattern 10
Visit shop
B&Q£184.97Visit shop B&Q - Internal White Primed Pattern 10 Fire Door1981 X 686 X 44mm (27")
Visit shop4 offers from £149.97 - £189.97
View price history by clicking the chart icon.
This guide is for homeowners and builders seeking a stylish, fire-rated internal door. The XL Joinery Pattern 10 offers a half-hour fire rating with a clean, elegant design, allowing for a cohesive look throughout the home. A key consideration is its specific dimensions, requiring precise fitting.
| Colour | White |
|---|---|
| Model Part Number | Pattern 10 |
| Brand | XL Joinery |
It means the door is designed to resist the passage of fire for at least 30 minutes, providing crucial time for evacuation and fire suppression.
Trimming fire doors is highly restricted. Any trimming must be done within the manufacturer's specified limits to avoid compromising the fire rating. Always consult the manufacturer's guidelines or a professional installer.
The door is supplied white primed, meaning it has a base coat of primer and is ready for you to apply your chosen topcoat of paint.
Yes, XL Joinery offers matching glazed doors (clear or obscure glass), bi-fold doors, and rebated door pairs in the Pattern 10 design.
This specific door measures 1981mm in height, 686mm in width, and 44mm in thickness.
No, this is an internal door and is not designed or rated for external use.
You need fire-rated hinges, locks, and potentially intumescent strips. Always use hardware specifically approved for fire doors and follow installation guidelines.
Check for obstructions in the frame or on the floor. Ensure hinges are tight and correctly aligned. The frame may be out of square, requiring professional adjustment.
Ensure the surface was properly prepared before painting. Apply thin, even coats of high-quality primer and paint. Lightly sand between coats if necessary.
Lubricate the hinge pins with a suitable lubricant like WD-40 or a silicone-based spray.
Ensure all installation components (frame, hinges, locks, intumescent strips) are fire-rated and installed as per regulations. Consult with a fire safety professional if unsure.
Setup: This door is supplied pre-primed and ready for finishing. It requires careful fitting by a qualified professional to ensure it hangs correctly and the fire rating is maintained. Ensure the frame and all hardware (hinges, locks) are also fire-rated and installed according to manufacturer guidelines and building regulations. Trimming the door is generally not recommended for fire doors, or must be done strictly within the manufacturer's specified limits to preserve the fire rating.
Compatibility: The Pattern 10 door is designed for use with standard door frames suitable for 44mm thick doors. It is compatible with a range of ironmongery, provided it is suitable for fire doors. Check with your installer or local building authority for specific hardware recommendations.
Care: To clean, use a slightly damp cloth to wipe down the surface. Avoid abrasive cleaners or excessive moisture, as this can damage the finish and the door material. For painted surfaces, use mild soap and water. Regularly check that hinges and locks are functioning correctly.
