Polycell Deep Hole Polyfilla is a two part plaster based filler that fills deep holes up to 50mm a...Polycell Deep Hole Polyfilla is a two part plaster based filler that fills deep holes up to 50mm and dries to a structurally sound repair in just 20 minutes. Application Description Remove inner Part B from the main Part A container. Mix equal amounts of Parts A and B on a flat surface into a smooth even coloured paste. Do not prepare more than can be applied in 5-10 minutes, as this is the working life of the product. Press the filler into the repair with a filling tool and finish off by smoothing with a wet tool and leave to set. Sand down when fully dry and overpaint when used outside.Structural repair - drillable and accepts screws and nails Fills holes up to 50mm deep in one application No shrinking,cracking or saggingCan be overpainted in 30 minutesPlaster based - smooth and easy to sandDrying Time 20mins. Polycell Deep Hole Polyfilla is a ready mixed formula for filling holes up to 50mm deep in one application. Quick and easy to use, this filler is ready to paint in just 30 minutes. A two part plaster based filler that fills deep holes up to 50mm and dries to a structurally sound repair in just 20 minutes. Fills holes up to 50mm deep in one application No shrinking, cracking or sagging Can be over painted in around 30 minutes Plaster based - smooth and easy to sand
This guide is for anyone looking to repair deep holes and imperfections in walls using Polycell Deep Hole Polyfilla. The key benefit is a quick, strong, and lasting repair that's ready to paint in just 30 minutes. However, the product is best suited for indoor use and may not be ideal for external applications due to its plaster-based composition. This guide covers everything from application to troubleshooting to help you achieve professional-looking results.
All features
Colour
Green
Model Part Number
5093048
Brand
Polycell
Extended Product Information
FAQs
How long does it take to dry?
Touch dry in approximately 20 minutes, depending on the surface and environmental conditions. It can be overpainted in about 30 minutes.
Can I use this product outdoors?
No, this product is designed for interior use only.
What is the shelf life of the product?
Unspecified in the product data, but always check the expiration date on the packaging.
How do I clean the tools after use?
Clean tools with warm water immediately after use.
Can I drill into the filler after it has dried?
Yes, the filler provides a structurally sound repair that can be drilled and accepts screws and nails.
What is the maximum depth of hole that can be filled in one go?
Up to 50mm.
Do I need to prime the surface before painting?
It is recommended to prime the surface if the repair is significant or if the existing paint is glossy.
What is the VOC content?
The product has a minimal VOC content (0.6 g/l).
Troubleshooting
Filler is not drying.
Ensure equal parts A and B were mixed. Check the expiration date. Ensure the surface is not too cold or humid.
Filler is shrinking after drying.
Ensure the surface is properly prepared. Apply in multiple thin layers if the hole is very deep, allowing each layer to dry fully.
Difficulty sanding.
Allow the filler to fully dry before sanding. Use appropriate sandpaper grit for the finish.
Filler cracking.
Ensure the filler is not applied too thickly in one go. Apply in layers, allowing each layer to dry fully.
Pros and Cons
Pros
Quick drying time minimizes project downtime.
Fills deep holes in one application, saving time and effort.
Easy to sand, ensuring a smooth finish.
Provides a structurally sound repair, suitable for screws and nails.
Minimal VOC content for indoor use
Cons
Not suitable for outdoor use.
Requires mixing of two parts, adding an extra step.
Working time is limited to 5-10 minutes after mixing.
May require multiple applications for very large holes.
Not ideal for areas with high moisture exposure.
Setup, Compatibility & Care
Setup:
Remove Part B from the Part A container.
Mix equal amounts of Parts A and B on a flat surface until a smooth, evenly colored paste forms.
Apply the mixed filler to the repair within 5-10 minutes.
Smooth the surface with a wet tool.
Allow to dry and then sand.
Compatibility:
Suitable for use on interior walls.
Compatible with most paints once fully dry.
Care:
Clean tools with warm water immediately after use.
Store unused product in the original containers, replacing the membrane and securing the lid firmly.