Best current price£35.04from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£35.04Visit shop Electrolube FRE400 Freezer Spray 400ml
Visit shop1 offer from £35.04
View price history by clicking the chart icon.
The Electrolube FRE400 is an essential diagnostic and maintenance tool designed for electronics technicians, hobbyists, and field engineers who need to quickly isolate thermal faults or perform delicate cold-assembly tasks. By rapidly cooling surfaces to -56°C, it allows for the immediate identification of intermittent electrical faults and protects heat-sensitive components during soldering; however, users must exercise caution due to the extreme low temperatures, which can cause frostbite upon skin contact or stress-fractures in sensitive materials if applied improperly.
| Model Part Number | FRE400 |
|---|---|
| Brand | Electrolube |
No, the FRE400 is designed to evaporate completely, leaving the component clean and ready for operation.
While the product is non-conductive, it is standard safety practice to turn off power whenever possible before spraying electronics.
This is a cooling spray, not a solvent cleaner. For cleaning flux or dust, use a specialized electronic cleaning solvent instead.
The product is capable of cooling components down to -56°C.
As an aerosol product, it should be kept away from open flames, sparks, and high heat sources at all times.
It is generally safe, but avoid prolonged exposure to very brittle plastics, as extreme cooling can increase the risk of cracking due to thermal shock.
Ensure the canister is kept in an upright position. If the canister is tipped too far, the propellant may vent without the cooling agent.
Remove the nozzle and check for debris or frozen residue. Use a dry, lint-free cloth to clear the orifice before re-attaching.
Apply the spray in shorter, controlled bursts. Allow the moisture to evaporate naturally or use a gentle stream of compressed air to clear the area.
Setup: The FRE400 is a ready-to-use aerosol. No specific setup is required other than ensuring the area is well-ventilated. Always hold the can upright during use to maintain optimal spray pressure and liquid output.
Compatibility: This product is compatible with most standard electronic assemblies, PCBs, and metallic mechanical parts. It is non-corrosive, but always test on a small, non-critical area if working with specialized plastics or uncommon coatings.
Care: Store the canister in a cool, dry place away from direct sunlight or heat sources. Do not puncture the container even when empty. Ensure the nozzle remains clean; if it becomes clogged, wipe the tip with a dry cloth or rinse briefly with a compatible electronic cleaner.
