Best current price£23.10from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£23.10Visit shop Slv Led Power Supply 24V 25W Phase Dimmable - 1006336
Visit shop1 offer from £23.10
View price history by clicking the chart icon.
This SLV LED power supply (1006336) is designed for professional installers and homeowners seeking precise control over 24V LED lighting systems. Its key benefit is smooth phase dimming capability, allowing for flexible ambiance creation. A caveat is its IP20 rating, making it suitable for dry indoor environments only. This compact driver efficiently converts AC power to a stable 24V DC output, delivering up to 25W and featuring leading/trailing edge dimming compatibility.
| Model Part Number | 1006336 |
|---|---|
| Brand | SLV |
This power supply is designed for 24V constant voltage LED strips and fixtures. Ensure the total power consumption of your LEDs does not exceed 25W.
This power supply is compatible with both leading edge and trailing edge dimmers. Ensure your dimmer switch is rated for the total load and is designed for LED applications.
No, this power supply has an IP20 rating, meaning it is designed for dry indoor environments only. It is not protected against moisture or water ingress.
Please refer to the retailer or SLV documentation for specific warranty information, as it can vary by region and seller.
Multiply the wattage per meter (or foot) of your LED strip by its total length, then add a buffer of 10-20% to ensure stable operation and longevity. Ensure this total does not exceed 25W for this model.
Yes, as long as the combined total wattage of all connected LED strips does not exceed the 25W maximum output of the power supply and all strips are rated for 24V.
It means the power supply can be controlled by standard household dimmer switches that operate by 'phasing' the AC waveform. It supports both leading edge (most common for incandescent) and trailing edge (better for LEDs) dimming technologies.
Check all AC and DC connections for proper seating and polarity. Verify the mains power supply is active. Ensure the total LED load does not exceed the 25W capacity.
Confirm that the dimmer switch is compatible with the power supply (leading/trailing edge) and is rated appropriately. Check for loose connections in the wiring or dimmer circuit.
Ensure adequate ventilation around the unit. Check that the LED load does not exceed the 25W maximum output. Reduce the load if necessary or consider a higher wattage power supply.
This may indicate the unit is overheating or the LED load is too close to the maximum capacity. Ensure proper ventilation and check the total wattage of the connected LEDs.
Setup:
Compatibility:
Care:
