Best current price£7.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£7.99Visit shop Dynatex 10 X 0.6Mm Mig Euro Torch Contact Tips For Mb15 Mb25 Welding 10 Pack
Visit shop2 offers from £7.99
View price history by clicking the chart icon.
Designed for both hobbyist welders and industrial professionals, these DYNATEX contact tips are essential components for maintaining consistent wire feed and electrical conductivity in MB25 welding torches. While they provide excellent precision for 0.6mm wire applications, users must ensure their torch setup specifically requires M6 threads and a 28mm length to avoid improper fitment or poor arc stability.
| Model Part Number | MB25 0.6MM TIP X M6 X28MML |
|---|---|
| Brand | DYNATEX |
No, this tip is precision-engineered specifically for 0.6mm wire. Using it with larger wire will cause immediate jamming.
Replacement frequency depends on your duty cycle, but you should change them as soon as you notice wire feed stuttering or the tip hole appearing worn/deformed.
These are designed for MB25 torches. While some torches share thread sizes, compatibility with other models is not guaranteed and depends on the specific gas diffuser design.
The length ensures the tip is correctly positioned within the nozzle shroud to provide the right gas coverage and contact point for the wire.
While you can remove external spatter, the internal wear (the orifice widening) is permanent. Once the internal bore is worn, the tip must be replaced for quality welds.
Check if the contact tip has developed an oval hole due to wear; replace the tip if the diameter has increased.
Ensure the tip is tightened properly and use anti-spatter spray to prevent accumulation on the tip face.
Check your wire feed speed settings and ensure the contact tip is not loose or damaged.
To install, ensure the welding torch is completely powered down and cooled. Unscrew the existing contact tip from the gas diffuser using a pair of welding pliers. Thread the new DYNATEX tip onto the M6 thread by hand, then tighten gently with pliers—do not overtighten, as this can strip the threads. Regularly inspect the exit hole for "keyholing" (oval-shaped wear), which indicates the tip needs replacement. Clean the nozzle assembly of spatter periodically to prevent the tip from fusing to the shroud.
