Paddle Paint Roller - 50mm X 15mm

The primary use is for consolidating fibreglass matting and laminating resins, specifically for efficient wet out and removal of trapped air bubbles in GRP/fibreglass applications.

No, this roller is specifically designed for fibreglass applications and its finned design is not suitable for standard paint application.

The roller can be effectively cleaned using acetone. It is best to clean it immediately after use before the resin hardens.

The roller features a lightweight aluminium construction.

The horizontal fins are designed to help spread the resin evenly and expel trapped air, ensuring a smooth and strong laminate finish.

Yes, it is suitable for various composite resins including polyester, vinyl ester, and epoxy resins commonly used in fibreglass applications.

This specific model is 50mm wide with 15mm deep fins.

Ensure the fins are clean and free of hardened resin. Apply consistent pressure when rolling. Check that the resin is at the appropriate viscosity for application.

Clean the roller thoroughly with acetone after use. Apply a mold release agent to the roller if working with particularly sticky resins, though this is less common for this type of tool.

Ensure you are maintaining a firm but relaxed grip. Take short breaks during extended work periods to mitigate fatigue. Consider the use of alternative roller sizes if the 50mm width is not ideal for your specific task.