Einhell Power X-Change Cordless Tile Cutting Machine - TE-TC 18/115 Li-Solo

You can cut ceramic, porcelain, and stone tiles.

No, the battery and charger are sold separately.

Use the tilting table and angle scale to set the desired angle from 0 to 45 degrees. You can also use the adjustable angle stop for miter cuts.

The maximum cutting depth is 16 mm at 45° and 24 mm at 90°.

Inspect the cutting disc regularly for wear. Replace the disc when it becomes dull or damaged to maintain optimal cutting performance.

After each use, remove any tile debris. Wipe down the table and surrounding areas with a damp cloth. Make sure the machine is turned off and the battery is removed before cleaning.

Replacement blades are available at most hardware stores or online retailers that sell Einhell products.

Check that the battery is properly inserted and charged. Also, ensure the power button is fully engaged.

Check the blade for damage or wear. Ensure the tile is properly supported during cutting. Make sure the water container is filled.

Ensure the non-slip feet are making proper contact with the surface. Check the blade and make sure it is properly secured.

Check and adjust the parallel stop and the angle stop.