Granville Metal Etching Primer - Grey

It is suitable for zinc sprayed, dipped, and continuous galvanized metal surfaces.

Wait 4-6 hours.

It is compatible with a wide variety of water-based and solvent-based coatings. Always check the topcoat manufacturer's instructions for specific compatibility.

Clean the surface thoroughly, remove any loose rust or contaminants, and lightly abrade the surface.

Coverage depends on the application method and the porosity of the surface. Always check the product label for specific coverage information.

This primer is designed for use on bare metal surfaces such as galvanized steel and zinc alloys. For previously painted surfaces, the existing paint needs to be assessed for compatibility.

Store the primer in a cool, dry place away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use.

Ensure the surface was properly prepared (cleaned and lightly abraded) before priming. Also, make sure the primer has fully dried before applying the topcoat.

Check that the primer is fully compatible with the chosen topcoat. Ensure the primer was applied evenly.

Make sure the ambient temperature and humidity levels are suitable for drying. Ensure proper ventilation.