Fiber Optic Cleaning Supplies: Cube Pen, 2.5 Swabs, 5 Cards
Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Fiber Optic Cleaning Kit by Fluke Networks is designed for IT professionals and technicians working with high-speed data transmission over optical fiber. Its key benefit is ensuring optimal network performance by effectively removing contaminants from fiber connections, preventing signal loss. A caveat to consider is that while comprehensive, it requires proper technique for best results. The kit includes a cleaning cube with wipes, five sealed cleaning zone cards, a solvent pen, and 2.5mm port cleaning swabs to address various cleaning needs for patch cords and internal ports.
| Colour | Multicolor |
|---|---|
| Model Part Number | NFC-KIT-BOX |
| Brand | Fluke Networks |
The kit is designed to remove common contaminants such as dust, dirt, oils, and smudges that can accumulate on fiber optic end faces and within ports.
Yes, the cleaning cube, cards, and solvent pen are suitable for most common fiber optic connectors, including LC, when used with the appropriate technique. The 2.5mm swabs are primarily for ports that accept that size, while adapter tips might be needed for specific LC port cleaning if not using a specialized LC cleaner.
It is recommended to clean fiber optic connections every time they are mated, especially in critical or high-performance networks. Proactive cleaning before making a connection is best practice.
Yes, the included solvent is specifically formulated for cleaning fiber optic connectors and end faces. It evaporates quickly and leaves no residue when used properly.
The cleaning cube and cards provide a surface for dry or wet cleaning of fiber optic connector end faces. The cards have sealed cleaning zones that prevent contamination from the outside environment.
Both methods can be effective. Dry cleaning is good for light dust. For more stubborn contaminants like oils or heavy dirt, wet cleaning using the solvent pen or solvent on a wipe/card is more effective, followed by a dry wipe or air blast if available.
Replace wipes and cards when they appear visibly soiled, saturated with solvent, or when cleaning no longer removes contaminants effectively. Using a dirty wipe can transfer dirt to the connector.
Ensure all fiber optic connectors and ports are thoroughly cleaned using the appropriate tools from the kit. Verify that cleaning was performed correctly, using a wet/dry method if necessary.
Use a fresh wipe or card, apply a small amount of solvent to the wipe/card (or use the solvent pen directly on the end face with caution), and re-clean the fiber end face. For ports, use a clean swab with solvent.
Ensure the pen cap was securely in place. Some pens may require a slight pressure or gentle priming on a test surface. If the pen is exhausted, it will need to be replaced.
Setup:
This kit requires no complex setup. The tools are designed for immediate use. Ensure you have a clean working environment to prevent re-contamination.
Compatibility:
The kit includes 2.5mm port cleaning swabs, which are compatible with common connectors like SC and FC. The solvent pen and cleaning cube/cards are generally suitable for most common fiber optic connector types (e.g., LC, SC, FC, ST) when used correctly.
Care:
