Best current price£111.69from eBay
Shopping.co.uk recommended and popular offers
eBay£111.69Visit shop Power-TEC Lateral Tension Puller 250mm 92733
Visit shop
Amazon£122.80Visit shop PowerTec 92733 Lateral Tension Puller 250mm
Visit shop4 offers from £111.69 - £135.17
View price history by clicking the chart icon.
The Power-TEC Lateral Tension Puller (250mm) is designed for automotive repair professionals needing precise control for pulling and tensioning operations. Its key benefit lies in its versatile puller arms that can be reversed for both inward and outward pulling, combined with a simple screw adjuster. A potential consideration is that it's optimized for use with specific Power-TEC accessories for best results.
| Model Part Number | 92733 |
|---|---|
| Brand | POWERTEC |
Its main purpose is to provide controlled pulling and tensioning force on automotive body panels for repair and alignment work, especially when used with glue pulling systems.
The puller arms are reversible via a quick-change system, allowing them to be turned around to facilitate both outward pulling and inward tensioning or bracing.
It is designed to work with Power-TEC Lateral Tension Glue Puller Pads (92736), the Gluematic Glue Gun (91237), and glue sticks (92342). Multi-Angle Pull Mounts (92737) can also be used for increased access.
While it can physically be attached to various setups, it is specifically optimized for use with the Power-TEC Gluematic Glue Gun (91237) and their compatible glue sticks and puller pads for the best results.
Tension is adjusted using the simple screw knob on the bridge. For more precise control or increased torque, a 3/8” drive ratchet can be attached to the knob.
The primary difference is the reach and leverage. The 250mm model is for more localized repairs, while the 450mm and 900mm models are designed for larger areas or when greater leverage is needed.
Clean off any debris or glue residue with a cloth after use. Store in a dry place. Ensure the screw adjuster threads are clean and free of obstructions for smooth operation.
Clean the threads of the screw adjuster thoroughly to remove any debris or dried glue. Apply a light lubricant suitable for metal components if necessary.
Ensure the quick-change mechanism is fully engaged. Inspect the mechanism for any damage or obstructions that might prevent a secure lock.
Verify that the tool is being used with compatible glue puller pads and glue. Ensure the pulling point is secure. Consider using a ratchet for more controlled and potentially higher force application. For very large or stubborn areas, a larger model (450mm or 900mm) may be required.
Ensure the puller arms are properly seated against the surface or pulling point. Clean the contact surfaces of both the puller arms and the workpiece for better grip.
Setup: To set up the tensioner, attach the puller arms to the main bridge. Ensure the quick-change system is securely locked. For outward pulling, position the arms against the surface or anchor point. For inward pulling, reverse the arms using the quick-change mechanism. Connect your chosen pulling accessory (e.g., a glue tab attached with a glue gun) to the workpiece. Adjust the screw knob to apply tension. For enhanced control, attach a 3/8” drive ratchet to the adjuster knob.
Compatibility: This 250mm puller is specifically designed for use with:
Larger sizes (450mm and 900mm) are available under Part Nos. 92734 and 92735, respectively.
Care: After each use, clean the puller arms and adjuster knob to remove any debris or glue residue. A dry or slightly damp cloth is typically sufficient. Store the tool in a clean, dry environment to prevent corrosion and ensure smooth operation of the screw adjuster. Periodically check the quick-change system for smooth operation.
