Paintable Wallpaper - White Plaster Effect - 103819

It is recommended to allow the wallpaper paste to dry completely, usually 24 hours, before painting to ensure optimal adhesion and finish.

Any standard emulsion or latex-based paint suitable for interior walls will work. Ensure good coverage for an even finish.

This wallpaper is dry-strippable. Simply peel it away from the wall starting at a seam. If any residue remains, it can usually be removed with warm water.

It means you apply the adhesive directly to the wall surface instead of to the back of the wallpaper strip, which generally makes the process quicker and less messy.

Each roll measures 10.05 meters in length and 53 cm in width, covering approximately 5.33 square meters.

While it is water-resistant and washable, it's best suited for living areas, bedrooms, and hallways. For areas with high humidity or direct water splashes, specific vinyl wallpapers are generally recommended.

It signifies that the wood used in the paper comes from FSC-certified forests, controlled sources, and/or recycled materials, promoting responsible forest management.

Ensure adequate paste has been applied to the wall and smooth out air pockets with a wallpaper brush or roller before the paste dries.

Use a very sharp blade for clean cuts. If the wallpaper is too soft, allow the paste to set slightly before trimming.

While it's a free match, ensure strips are hung level and straight. Minor adjustments can be made before the paste fully adheres.

Check that the wall surface is properly prepared (clean, dry, firm, absorbent) and that the correct type and amount of adhesive were used.