Best current price£15.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.00Visit shop B&Q - Tct Circular Saw Blade184mm X 16mm X 20 TeethFor HardwoodSoftwoodPlywoodMdf Board
Visit shop1 offer from £15.00
View price history by clicking the chart icon.
This Toolpak 184mm circular saw blade, featuring 20 tungsten carbide teeth, is designed for professional tradespeople and construction site use, offering durable and precise cuts on a variety of wood materials. Its hardened steel body and key-hole expansion slots minimize vibration and warping, ensuring a cleaner finish and extended blade life, though users should be mindful of the maximum RPM limit for optimal safety and performance.
| Brand | Toolpak |
|---|
The key-hole expansion slots help to reduce noise and vibration during operation. They also assist with heat dissipation, which prevents the blade's outer edge from overheating and distorting.
No, this blade is designed specifically for wood and wood-based materials such as hardwood, softwood, plywood, particle board, and MDF. It is not suitable for cutting metal.
ATB stands for Alternate Top Bevel. This tip geometry, combined with a positive rake angle, is designed to provide an efficient and clean cut in wood materials, allowing the blade to slice through rather than just scrape.
This blade has a 16mm arbor hole. You need to ensure your circular saw has a 16mm spindle to mount this blade. Always check your saw's specifications for compatibility.
The blade is rated for a maximum speed of 8,300rpm. It is crucial not to exceed this speed to ensure safety and prevent damage to the blade or the saw.
The lifespan of the blade depends on usage frequency, material type, and care. Replace the blade when the tungsten carbide teeth become significantly dulled, chipped, or damaged, which will result in a noticeable decrease in cut quality.
With 20 teeth, this blade is optimized for general-purpose and faster cutting. For very fine, splinter-free finish cuts, especially on delicate materials or veneers, a blade with a higher tooth count (e.g., 40-60 teeth) would typically provide a superior result.
Ensure the blade is securely fastened to the saw arbor. Check for any warping or damage to the blade. Make sure the saw's arbor nut is tightened correctly. Verify the blade is not rubbing against the saw's guard or base plate.
Inspect the tungsten carbide teeth for damage, chipping, or excessive wear. Clean any accumulated resin or debris from the teeth. Ensure you are cutting within the recommended material types and that the saw is operating at an appropriate speed.
Reduce the feed rate; do not force the blade through the material. Ensure the saw's motor is functioning correctly and not overheating. Check that the key-hole expansion slots are clear of debris.
Confirm the blade is suitable for the material (e.g., hardwood). Ensure you are maintaining a consistent and steady feed rate. If the material is particularly dense, consider a blade with more teeth for a finer cut, or ensure the saw has sufficient power.
Setup:
Compatibility:
Care:
