Copper Metal Veneer Sheet - Lite Stone

No, this material is not suitable for wet areas like shower walls or full bathroom environments due to its composition and potential for moisture damage.

The thickness of the metal veneer sheet ranges from 2 to 4mm.

The material weighs between 1.5 to 2.0 KG per square meter.

No, this product is designed for internal applications only and is not suitable for exterior walls.

Clean the surface with a soft, damp cloth. Avoid abrasive cleaners to prevent scratching.

It is recommended to apply the veneer to a smooth, stable, and clean substrate. Remove existing wallpaper or ensure it is firmly adhered and suitable for application.

Use a high-quality adhesive recommended for metal veneers and the specific substrate material you are applying it to. Consult with your local hardware or specialized building materials supplier for recommendations.

Ensure the substrate is clean, dry, and properly prepared. Use the correct type and amount of adhesive. Apply firm, even pressure during installation.

These may occur if air was trapped during application. Try to smooth them out immediately with a clean cloth or roller. For persistent bubbles, you may need to carefully lift the edge and reapply adhesive.

Avoid using abrasive cleaning materials. Minor scratches may be difficult to remove. For significant damage, consider replacing the affected sheet.

Use sharp cutting tools designed for sheet materials, such as a heavy-duty utility knife or metal shears. Score the material deeply before making the cut.