375mm Extra-Long Locking Pliers - Loops

These pliers have a jaw capacity of up to 50mm (approximately 2 inches).

While they provide a secure grip, their extra-long size (375mm) makes them best suited for tasks requiring reach rather than intricate, delicate manipulation. The jaws are designed for firm holding.

The grip pressure is adjusted by the initial setting of the jaw opening using the screw at the base of the rotating jaw. Once locked, the pressure is determined by the jaw size and the material's resistance.

They are constructed from drop-forged and heat-treated steel for maximum durability and strength.

This finish provides a layer of protection against corrosion and rust, extending the tool's lifespan and maintaining its appearance.

Yes, these pliers come with a lifetime guarantee, reflecting the manufacturer's confidence in their quality and durability.

It is recommended to lubricate the pivot points and adjustment screw periodically, especially after cleaning or if the pliers are exposed to moisture, to ensure smooth operation.

Ensure the adjustment screw is set to the correct jaw opening for the object. Clean any debris from the jaws and pivot points. Check if the object's diameter exceeds the 50mm jaw capacity.

Clean the pivot and release mechanism thoroughly. Apply a light lubricant (e.g., WD-40 or machine oil) to the pivot points and test operation. If stiffness persists, inspect for damage.

Ensure the object is within the jaw capacity and positioned correctly. Clean the serrations on the jaws and the object being gripped. For very smooth surfaces, consider adding a thin rubber or cloth shim if grip is critical and damage is not a concern.

Clean the rusted areas with a fine-grade steel wool or a wire brush. Apply a rust inhibitor or light machine oil to protect the surface. Dry thoroughly. If rust is extensive or deep, it may affect performance.