Digital Soldering Station - 80W - AT-980E
Best current price£109.59from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£109.59Visit shop AT-980E Digital Soldering Station 80W ATTEN
Visit shopeBay£109.59Visit shop One Offer
1 offer from £109.59
View price history by clicking the chart icon.
Product Information
Full details
The Switch Electronics AT-980E is an 80W digital soldering station designed for electronics hobbyists, engineers, and professionals who require precise thermal control and rapid heat-up times. Its primary benefit is the combination of an MCU-controlled heating system and ESD-safe construction, ensuring sensitive components remain protected during delicate soldering tasks. While it offers excellent performance, users should note that it requires specific 900M series replacement tips, which may limit the use of proprietary specialized tips from other manufacturers.
All features
| Model Part Number | AT-980E |
|---|---|
| Brand | Switch Electronics |
Extended Product Information
FAQs
Does this station come with a UK plug?
Yes, the AT-980E is supplied with a standard 230V UK power plug.
Can I use any soldering tip with this station?
No, it is specifically designed for use with the 900M series tip ecosystem.
Is this station suitable for lead-free solder?
Yes, with an adjustable temperature range up to 480°C, it easily handles the higher melting points of lead-free solder.
How do I save a temperature preset?
Set the desired temperature using the controls, then hold one of the three preset buttons until the value is saved.
Is the unit ESD safe?
Yes, the station is built with ESD-safe materials to prevent static damage to sensitive components.
What is the wattage of the heating element?
The station features an 80W four-core heating element.
Troubleshooting
The station displays an error code on the LCD.
Check that the soldering iron handle is securely connected to the base unit; if loose, re-seat the connector.
The tip is not melting solder effectively.
Ensure the tip is properly tightened to the heating element; check if the tip is oxidized and clean it with a brass sponge.
Temperature fluctuates significantly.
Perform a temperature calibration via the MCU settings or check if the heating element is nearing the end of its service life.
Pros and Cons
Pros
- Extremely fast heat-up time due to the 80W four-core element
- ESD-safe design protects sensitive electronic components
- Three convenient temperature presets for efficient workflow
- Digital LCD provides accurate temperature monitoring
- Wide availability of 900M series tips
Cons
- Limited to 900M series tips only
- Requires a 230V UK power supply
- The iron cable can feel stiff during initial use
- Manual calibration may be needed periodically for high-precision work
Setup, Compatibility & Care
To set up the AT-980E, connect the iron to the main unit's port and ensure the base is placed on a stable surface. Plug the station into a standard 230V UK wall outlet. Always use a damp (not soaking) sponge or a brass wire cleaner to keep the tip tinned and free of oxidation after every use. When changing tips, always turn off the unit and allow the iron to cool fully. The station is compatible with all standard 900M series tips, allowing you to swap between conical, chisel, or knife-edge tips depending on your specific project needs.