U-Pol Weld Through Primer - Bronze
Best current price£26.26from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£26.26Visit shop U-POL 2 x WELD#2 Weld Through Copper Rich Zinc Primer Spray 450ml Aerosol UPol
Visit shopAmazon£26.26Visit shop All Offers
2 offers from £26.26
View price history by clicking the chart icon.
AmazonU-POL 2 x WELD#2 Weld Through Copper Rich Zinc Primer Spray 450ml Aerosol UPol
Free delivery in 1–3 days
£26.26
Visit shop
OnBuy.com2 X U-Pol Weld#2 Weld Through Copper Rich Zinc Primer Spray 450Ml Aerosol Upol 5060859872710
Free delivery in 1–3 days
£26.26
Visit shop
Product Information
Full details
Designed primarily for professional automotive technicians and metal fabricators, U-Pol WELD #2 Copper is a high-adhesion, zinc-rich primer that provides essential rust protection without compromising weld integrity. This conductive spray is ideal for pre-treatment of metal surfaces before spot or MIG welding, allowing for strong, clean welds. A key caveat to note is that while it provides a durable anti-corrosion barrier, it must be allowed to dry completely according to manufacturer specifications to prevent weld spatter or porosity issues.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | WELD#2 |
| Brand | U-Pol |
Extended Product Information
FAQs
Can I paint over U-Pol WELD #2?
This product is designed as a weld-through primer. While it provides rust protection, it is not intended to be used as a standalone primer for topcoats; you should use a compatible primer-surfacer over your finished assembly.
Does this product prevent rust on outside surfaces?
It is primarily intended for hidden mating surfaces, such as inside flanges or overlapping panels where moisture can accumulate.
Is it safe for all types of welding?
It is highly effective for spot and MIG welding, but always ensure the area is well-ventilated regardless of the welding technique used.
How long should I wait after spraying before I weld?
Wait until the coating is touch-dry. Depending on humidity and temperature, this usually takes 10 to 20 minutes.
Can I use this on aluminum?
This primer is specifically formulated for steel surfaces. Check the product data sheet if considering use on non-ferrous metals.
Troubleshooting
Nozzle clogging during application
Invert the can and spray for 3-5 seconds to clear the valve, or remove the nozzle and soak it in a solvent cleaner.
Excessive smoke while welding
The coating layer is likely too thick; ensure a thin, uniform application and allow extra time for the propellant to flash off before welding.
Poor electrical conductivity
Ensure the surface was sanded to bare metal before application and that the primer has fully cured.
Pros and Cons
Pros
- Reduces preparation time by eliminating the need to grind away primer
- Excellent anti-corrosion properties protect hidden metal seams
- Easy to visualize coverage due to the bronze pigment
- Maintains structural integrity of welds
Cons
- Requires proper ventilation due to chemical aerosol content
- Not intended for use as a finish primer for topcoats
- Specific drying time required before welding can begin
Setup, Compatibility & Care
Before application, ensure the metal surface is cleaned with a degreaser and sanded to remove any existing rust or loose debris. Shake the aerosol can vigorously for at least two minutes until the mixing ball rattles freely. Hold the can approximately 8 to 10 inches from the surface and apply using smooth, sweeping motions. Always test the spray on a piece of scrap metal first to gauge flow. Post-use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging. Store the product in a cool, dry place away from direct sunlight and open flames to maintain the integrity of the chemical contents.