Shopping.co.uk

SolaDirect Rope Clip Clamp - 4 x 2 mm

SolaDirect Rope Clip Clamp - 4 x 2 mm

The wire rope clamps are used to fix the loose end of the loop back to the wire rope. This allows ...

Best current price£3.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£3.99Visit shop

B&Q - 4 X 2 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes

Visit shop

One Offer

1 offer from £3.99

View price history by clicking the chart icon.

B&QB&Q - 4 X 2 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Free delivery in 1–3 days
£3.99
Visit shop

Product Information

Full details

The SolaDirect Rope Clip Clamp - 4 x 2 mm is designed for securely fastening the loose end of a wire rope loop back onto the main rope. It's ideal for DIY enthusiasts, riggers, and anyone needing to create reliable connections for various applications, from light rigging to general utility. A key benefit is its straightforward application for creating secure loops. However, users should ensure the clamp is correctly sized for the rope to maintain its full strength.

All features

BrandSolaDirect

Extended Product Information

FAQs

What is the primary purpose of this rope clip clamp?

Its primary purpose is to securely fasten the loose end of a rope loop back onto the main rope, creating a secure termination point for connections.

What types of rope can be used with this clamp?

This clamp is suitable for wire rope up to 4 mm in diameter, and for jute and polypropylene ropes up to 2 mm in diameter.

How many clamps should I use?

For most applications, it is recommended to use a minimum of two clamps spaced appropriately along the loop. For critical applications, consult the rope manufacturer's guidelines.

Do I need special tools to install this clamp?

No, standard tools such as a wrench are sufficient for tightening the nuts on the U-bolt.

Can this clamp be used for heavy lifting applications?

While it creates a secure loop, it is not typically rated for safety-critical heavy lifting without specific engineering assessment. Always consult load ratings and professional advice for such applications.

How should I maintain the clamps?

Periodically check that the nuts remain tight and inspect for any signs of corrosion or damage. Clean with a dry cloth.

What does '4 x 2 mm' mean?

It indicates the clamp is designed for wire rope of approximately 4 mm diameter and jute/polypropylene rope of approximately 2 mm diameter.

Troubleshooting

Clamp does not hold the rope securely

Ensure the clamp is the correct size for the rope diameter. Verify that at least two clamps are used, properly spaced, and tightened evenly with a wrench. Check if the rope itself is damaged or slippery.

Rope appears damaged under the clamp

The clamp may be overtightened or incorrectly positioned. Loosen the nuts, reposition the clamp, and tighten evenly, ensuring the saddle rests flat against the rope without crushing it. Consider using a thimble within the loop for added protection.

Nuts are difficult to tighten or strip

Ensure you are using the correct size wrench. Clean any debris from the threads. If the threads are damaged, the clamp may need to be replaced.

Pros and Cons

Pros

  • Provides a reliable method for securing rope loops.
  • Versatile across different rope types (wire, jute, polypropylene).
  • Simplifies the process of connecting ropes to other hardware.
  • Clear sizing (4 x 2 mm) for easy selection.
  • Easy to install with common tools.

Cons

  • Requires proper tightening to ensure security; over or under-tightening can compromise strength.
  • Not designed for extremely heavy-duty or safety-critical load-bearing applications without professional assessment.
  • May require multiple clamps for adequate holding power depending on the application.
  • Corrosion can occur if exposed to harsh environments without protection.

Setup, Compatibility & Care

Setup:

  1. Form the desired loop in the rope.
  2. Place the rope clip clamp over the 'dead end' of the rope, close to the main loop.
  3. Ensure the clamp is oriented correctly, with the U-bolt on the 'dead end' and the saddle on the 'live end' of the rope.
  4. Tighten the nuts evenly on the U-bolt.
  5. For optimal security, use at least two clamps, spaced appropriately, and tighten them firmly using a wrench. Check the rope manufacturer's recommendations for the number and spacing of clamps.

Compatibility:

  • Wire rope: Up to 4 mm diameter.
  • Jute and polypropylene ropes: Up to 2 mm diameter.

Care:

  • Periodically inspect clamps for signs of corrosion, wear, or loosening.
  • Re-tighten nuts if they become loose due to vibration or rope settling.
  • For wire ropes, inspect for any deformation or damage to the rope strands caused by the clamp.
  • Clean with a dry cloth; avoid harsh chemicals.

Price History

DatePrice
Visit shop