Setup, Compatibility & Care
Setup: To use the shackles, unscrew the pin completely. Pass the shackle through the loop of the item to be connected (e.g., a rope, chain, or eye). Insert the screw pin back into the shackle body and tighten it fully by hand until it is snug. Ensure the pin is seated correctly and fully engaged for maximum safety. It is recommended to tighten the pin further with a suitable tool if required by the application, but avoid over-tightening which could damage the threads.
Compatibility: These shackles are designed to connect various lifting and rigging components. They are compatible with standard ropes, chains, webbing slings, and eye bolts that fit within the shackle's internal dimensions (approx. 16mm width, 29.5mm internal length). Always ensure the component being attached also meets or exceeds the required load rating.
Care: Due to the 'Self Colour' finish, these shackles may develop surface rust over time, especially in humid or wet conditions. To maintain performance and appearance:
- Clean the shackles regularly with a wire brush to remove any loose rust or debris.
- Wipe dry after use.
- Apply a light coat of oil or grease to the threads of the screw pin and the body to inhibit rust formation. Store in a dry environment when not in use. Regularly inspect for any signs of significant corrosion, wear, or damage before each use.