Kenable Usb 3.0 Superspeed A Male To 10 Pin Micro B Male Cable Black 0.5M

This cable supports USB 3.2 Gen 1 (3.1 Gen 1) SuperSpeed, which has a theoretical maximum speed of 5 Gbps (Gigabits per second).

No, this cable has a USB Type-A connector on one end and a Micro-USB B connector on the other. It is not compatible with USB-C ports.

The cable supports high current flow due to its construction and USB 3.0 capabilities, which can facilitate faster charging for devices that support it, when used with a compatible power adapter.

It is ideal for charging and data transfer for new tablets, some hard drive caddies, the Samsung S5 mobile phone, and the Galaxy Note 3, all of which use the USB 3.0 Micro-B connector.

The short 0.5m length is intentional for easy storage, portability, and to reduce cable clutter, making it ideal for mobile use or in-car applications.

Yes, the cable is backward compatible and will work with USB 2.0 ports, but it will operate at the slower USB 2.0 speed (up to 480 Mbps).

Ensure both ends of the cable are securely plugged into the device and the host (computer/adapter). Try a different USB port or power adapter. Verify the device uses a USB 3.0 Micro-B port. Clean the connectors on both the cable and the device.

Confirm that both the device and the host port support USB 3.2 Gen 1 (3.1 Gen 1) or higher for optimal speeds. If connected to a USB 2.0 port, speeds will be limited. Ensure no other high-bandwidth devices are competing for the same USB controller.

Gently check for debris in the ports. If the issue persists, the port or connector may be worn. Ensure you are using the correct Micro-B connector; this cable uses the 10-pin version.