This 87mm Galeco Copper Effect Steel Downpipe kit contains the following components:
2x Steel Down...This 87mm Galeco Copper Effect Steel Downpipe kit contains the following components:
2x Steel Downpipe Lengths 3mtr
6x Steel Gutter Downpipe Clips
1x Steel Gutter Socket
2x Steel Gutter Offset Bends
Downpipes should be connected to the outlets using a pipe connector. Pipes should be clipped at spacings of 1.8m maximum. 87mm downpipe can be connected to 110mm drainage using a D96 adaptor. Insert the adaptor onto the steel downpipe prior to inserting it into the drainage pipe or fitting. In the case of 100mm downpipes (for the 150mm gutter system) these can be connected directly into a 110 mm ring seal connection.
This steel offset downpipe kit in copper effect finish provides a complete solution for roofline rainwater management on residential and light commercial buildings. Manufactured from high strength galvanised steel, it delivers long term durability, excellent corrosion resistance and a professional architectural appearance. Designed for efficient surface water control, this round system is suitable for extensions, refurbishments and new build projects where performance and longevity are essential.
This Galeco Steel Round Offset Downpipe Kit in Copper Effect is designed for homeowners and light commercial property owners needing a durable and aesthetically pleasing solution for rainwater management. Its key benefit is providing efficient surface water control with long-term durability due to its high-strength galvanised steel construction. A potential caveat is that specific adaptors may be required for connection to certain drainage systems.
All features
Model Part Number
Galeco
Brand
PBSL Group
Extended Product Information
FAQs
What material is the downpipe kit made from?
The kit is manufactured from high-strength galvanised steel for durability and corrosion resistance.
What is the diameter of the downpipe?
The downpipe in this kit has a diameter of 87mm.
Can this downpipe connect to a larger drainage pipe?
Yes, the 87mm downpipe can be connected to a 110mm drainage system using a specific D96 adaptor.
How often should I clean the downpipe?
It is recommended to clean the downpipe system regularly, especially after periods of heavy leaf fall, to prevent blockages.
What is included in the kit?
The kit typically contains steel downpipe lengths, steel gutter downpipe clips, a steel gutter socket, and steel gutter offset bends.
What is the recommended spacing for the downpipe clips?
Clips should be installed at maximum spacings of 1.8 meters to ensure the stability of the downpipe.
Is this system suitable for commercial buildings?
The product is suitable for light commercial buildings as well as residential applications.
Troubleshooting
Downpipe is leaking at the joint.
Ensure the steel gutter socket or pipe connector is properly sealed. Re-seal if necessary, or check for damage to the components.
Water is not draining effectively.
Check for blockages in the downpipe, socket, or connecting drainage. Clean out any debris.
Clips feel loose or downpipe is unstable.
Ensure clips are securely fastened to the wall and that the maximum spacing of 1.8m is adhered to. Check wall fixings.
Difficulty connecting to existing drainage.
Verify that the correct adaptor (e.g., D96 for 110mm drainage) is being used. Ensure the downpipe end and adaptor are clean and properly seated.
Pros and Cons
Pros
Durable and corrosion-resistant construction
Aesthetically pleasing copper effect finish
Efficient rainwater management
Suitable for various building projects
Complete kit simplifies installation
Cons
May require specific adaptors for drainage connection
Steel material can be heavier than plastic alternatives
Requires appropriate clipping for structural integrity
Setup, Compatibility & Care
Setup:
Attach downpipe lengths using the provided steel gutter socket.
Use the steel gutter offset bends to adjust the downpipe's direction as needed.
Secure the downpipes to the wall using the steel gutter downpipe clips, ensuring maximum spacing of 1.8 meters.
Connect the downpipe to the roof outlet using a pipe connector.
Compatibility:
The 87mm downpipe can connect to 110mm drainage systems using a D96 adaptor. Insert the adaptor onto the steel downpipe before connecting to the drainage pipe or fitting.
For 150mm gutter systems, 100mm downpipes can connect directly into a 110mm ring seal connection (note: this kit is 87mm).
Care:
Clean the downpipe system regularly to remove debris such as leaves and twigs, which can cause blockages.
Use a damp cloth for cleaning the exterior. Avoid abrasive cleaners that could damage the copper effect finish.
Inspect the system periodically for any signs of damage or corrosion and address them promptly.