HG Protective Coating Satin Finish - 1 Litre
Best current price£21.48from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£21.48Visit shop Hg Protective Coating Satin Finish (Satin Gloss Polish) 1 Litre
Visit shopOnBuy.com£21.48Visit shop One Offer
1 offer from £21.48
View price history by clicking the chart icon.
OnBuy.comHg Protective Coating Satin Finish (Satin Gloss Polish) 1 Litre
Free delivery in 1–3 days
£21.48
Visit shop
Product Information
Full details
The HG Protective Coating Satin Finish (P14), now also known as HG Tile Protector, is designed for homeowners and DIY enthusiasts looking to protect and enhance porous surfaces like tiles, natural stone, and grout. Its key benefit is providing a durable, satin-finish protective layer that repels dirt, grease, and water, making surfaces easier to clean and maintain. A potential caveat is that proper surface preparation is crucial for optimal adhesion and longevity.
All features
| Model Part Number | P14 |
|---|---|
| Brand | HG |
Extended Product Information
FAQs
What is the difference between HG Protective Coating Satin Finish (P14) and HG Tile Protector (P14)?
There is no difference in the product itself. HG has updated the product labeling; the formula and intended use remain exactly the same. It is the same product formerly known as HG Protective Coating Satin Finish (P14).
How long does the protection last?
The durability depends on the type of surface and the level of wear and tear. Under normal conditions, the protection can last for several years. Regular cleaning with mild detergents will help maintain its effectiveness.
Can I use this on my shower tiles?
Yes, it is suitable for use on porous tiles and grout in shower areas. It helps protect against soap scum and water marks, making cleaning easier. Ensure the area is well-ventilated during application and curing.
Do I need to seal the grout separately?
This product can be applied to both tiles and grout. It will seal and protect porous grout lines, making them less susceptible to staining and moisture.
Can I apply this over an existing sealant?
It is best to remove any old or existing sealants completely before applying HG Protective Coating. Apply only to clean, bare, porous surfaces for optimal adhesion and performance.
Does it change the color of the tiles?
The product provides a satin finish that may slightly deepen the color of porous materials. It is crucial to test on an inconspicuous area first to ensure you are happy with the final appearance, especially on natural stone.
How many square meters can I cover with one litre?
Coverage varies depending on the porosity and texture of the surface. Typically, one litre can cover approximately 10-20 square meters for a single coat. Always refer to the product packaging for specific coverage estimates.
Troubleshooting
Uneven finish or streaks after application.
This can be caused by applying the product too thickly or unevenly. Ensure a thin, consistent coat. If the issue persists after drying, light sanding and reapplication may be needed, or test in a small area first.
Product does not seem to be repelling water/stains.
The surface may not have been adequately prepared, or the product may not have fully cured. Ensure the surface was clean and dry before application and allow adequate curing time. Reapplication might be necessary if the surface was not porous enough or prep was insufficient.
Surface appears too dark or discolored.
This can occur with certain types of natural stone. Always test the product on an inconspicuous area first to check for desired aesthetic results before applying to the entire surface.
Product leaves a sticky residue.
This typically indicates the product was applied too heavily or did not dry/cure properly. Ensure thin coats and adequate drying time in a well-ventilated space. Cleaning with a mild solvent might remove residue, but test first.
Pros and Cons
Pros
- Provides excellent stain and water resistance.
- Facilitates easier and quicker cleaning of protected surfaces.
- Enhances the aesthetic with a natural satin finish.
- Offers durable, long-term protection.
- Suitable for a wide range of porous materials.
Cons
- Requires thorough surface preparation for best results.
- May alter the appearance of very dark or highly polished surfaces.
- Application requires care to avoid streaks or uneven coverage.
- Not suitable for non-porous or already sealed surfaces without testing.
- Ventilation is necessary during application.
Setup, Compatibility & Care Instructions
Setup:
- Surface Preparation: Ensure the surface is thoroughly clean, dry, and free from dust, grease, and old coatings. Degrease tiles and grout with HG Surface Cleaner before application.
- Ventilation: Work in a well-ventilated area.
- Application: Apply the product evenly using a clean, lint-free cloth, sponge, or roller. Work in sections and avoid applying too thickly.
Compatibility:
- Suitable for porous tiles (ceramic, terracotta, quarry), natural stone (e.g., marble, granite, slate), and grout.
- Not recommended for non-porous surfaces, highly polished surfaces (unless tested), or areas intended for direct food contact without further appropriate sealing.
Care:
- Allow the coating to cure fully as per product instructions (typically 24-48 hours) before exposing to heavy use or moisture.
- Clean treated surfaces with mild detergents and water. Avoid abrasive cleaners or harsh chemicals that could damage the protective layer.
- Reapplication may be necessary after several years, depending on wear and tear and cleaning frequency.