Setup, Compatibility & Care
- Preparation:
- Ensure the surface is clean, sound, and free from loose debris, oil, or grease.
- If necessary, dampen the surface before application.
- Mixing:
- Add water to the cement according to the manufacturer's instructions to achieve the desired consistency.
- Mix thoroughly until a smooth paste is formed.
- Use the mixed cement within the specified working time (typically a few minutes).
- Application:
- Apply the cement to the prepared surface, filling any gaps or cracks.
- Smooth the surface using a trowel or other appropriate tools.
- Curing:
- Allow the cement to set and cure according to the manufacturer's recommendations (usually around 20 minutes to set).
- Avoid exposing the cement to excessive moisture or direct sunlight during the curing process.
Compatibility:
Bostik Rapid Setting Cement is compatible with most common building materials, including concrete, brick, and stone. However, it is essential to check the compatibility with any specific materials before use.
Care:
- Store the cement in a dry place, away from moisture and direct sunlight.
- Keep the container tightly sealed to prevent the cement from hardening.
- Clean tools and equipment immediately after use with water.