Miele DAS2620 60cm Telescopic Built In Extractor Hood with Stainless Steel (10-ply) Grease Filter,...Miele DAS2620 60cm Telescopic Built In Extractor Hood with Stainless Steel (10-ply) Grease Filter, Miele CleanCover & Energy Efficient LED Lighting.
STAINLESS STEEL GREASE FILTERS (10-LAYER) - Easy to use and effective against grease
Miele cooker hoods are equipped with 10-ply stainless-steel grease filter(s) for excellent grease removal. Built-in fall protection allows you to handle them safely and protects your hob from damage. The top layer and filter frame are made of high-quality stainless steel so that no visible discolouration occurs from being cleaned in the dishwasher and they retain their stunning appearance.
MIELE CLEANCOVER - Convenience and safety in detail
Located behind the grease filters is the Miele CleanCover: Instead of sharp metal edges and electrical components you will find only a sealed, smooth surface. It is particularly easy to clean and protects you from coming in contact with cables and motor components. Miele attention to detail - for your convenience and safety.
SAFETY SWITCH-OFF - Always on the safe side
The cooker hood will switch off automatically after 10 hours. This ensures maximum safety even in the event of operating errors.
Extraction Rate (m3/h) - 410
Extraction Type - Ducted/Recirculating
Classic design - stainless steel panel, 60 cm wide
LED strip for uniform lighting
Product Dimensions (HxWxD) (mm) - 436 x 596 x 272.5
This guide is for anyone looking to understand and effectively use the Miele DAS2620 extractor hood. This slimline hood offers powerful extraction with a sleek design, keeping your kitchen air clean and fresh. Note that proper installation and adherence to safety guidelines are essential for optimal performance.
All features
Colour
Silver
Energy Efficiency
A
Model Part Number
11878170
Brand
Miele
Extended Product Information
FAQs
How often should I clean the grease filters?
It is recommended to clean the grease filters approximately once a month, or more frequently if you cook frequently and with a lot of grease.
Are the grease filters dishwasher-safe?
Yes, the stainless steel grease filters are dishwasher-safe.
How often should I replace the charcoal filters?
Charcoal filters should be replaced every 6 to 12 months, depending on usage. Refer to your manual for specific recommendations.
What is the CleanCover?
The CleanCover is a smooth, sealed surface behind the grease filters, preventing contact with electrical components and motor, and making cleaning easier and safer.
What is the maximum extraction power?
The maximum extraction power is 410 m³/h.
What type of lighting does the hood use?
The hood uses an LED strip for energy-efficient and bright illumination.
Can I use the hood in recirculating mode?
Yes, it can be used in recirculating mode. However, you need to install charcoal filters (sold separately).
Troubleshooting
Extractor hood not turning on.
Check the power supply and ensure the hood is properly connected to the electrical outlet. Check the circuit breaker.
Poor extraction performance.
Check if the grease filters are clean. Clean or replace them if necessary. Verify the ducting is not blocked (for ducted installations). Check and replace charcoal filters (for recirculating installations).
Hood making excessive noise.
Ensure the hood is securely mounted. Check for any obstructions in the fan or ducting. The noise level is influenced by the fan speed, so reduce the speed if possible.
LED lights not working.
Check the light bulb (LED) and replace if necessary. Consult the manual or contact Miele customer service for further assistance.
Pros and Cons
Pros
Efficient grease removal with 10-layer stainless steel filters.
Dishwasher-safe grease filters for easy maintenance.
CleanCover design for enhanced safety and easy cleaning.
Energy-efficient LED lighting.
Automatic switch-off for added safety.
Sleek and modern design.
Cons
Installation requires specific measurements and potentially professional help.
May require ducting for optimal performance (in ducted mode).
Higher initial cost compared to some other extractor hoods.
Setup, Compatibility & Care
Setup
Installation: The DAS2620 is a semi built-in (pull out) model. Installation should be performed according to the provided instructions. Ensure proper electrical connections and secure mounting.
Ducting: For ducted installations, connect the hood to an exhaust vent leading outside. Ensure the ducting is properly sealed.
Recirculating: For recirculating installations, install charcoal filters (sold separately) to absorb odors. Note that the filters require replacement periodically based on usage.
Minimum Distance: Maintain the minimum distances from the cooktop as specified in the manual, 45 cm for electric hobs and 65 cm for gas hobs.
Compatibility
Hob Compatibility: Suitable for use above electric, gas, and induction cooktops.
Power: Requires a 230V, 50 Hz power supply.
Care
Grease Filters: The stainless steel grease filters are dishwasher-safe. Clean them regularly (about once a month, depending on usage) to maintain efficiency.
CleanCover: Wipe the CleanCover surface with a damp cloth to remove any grease or debris.
Exterior: Clean the stainless steel housing with a mild detergent and a soft cloth. Avoid abrasive cleaners.
Charcoal Filters: Replace charcoal filters as recommended in the manual (typically every 6-12 months).