Professional Grade ready-to-use White Cerium Oxide Glass Polishing Compound. Optimized for the bes...Professional Grade ready-to-use White Cerium Oxide Glass Polishing Compound. Optimized for the best optical polish, it removes imperfections, sanding marks, hairline scratches, and surface stains. Ideal for the final polishing step in multi-stage glass scratch removal. Suitable for all glass surfaces, mirrors, laminated, and tempered glass. Can also be used on stones, minerals, marble, ceramics, or metal surfaces. For use with a polisher at 1500-2500rpm. Average particle size is 1.2 microns.
This guide is for anyone looking to restore glass surfaces to their original clarity using the Glass Polish Glass Polishing Compound - GP14003. It's ideal for removing scratches, imperfections, and stains from various glass types, including mirrors and tempered glass. The primary benefit is achieving a professional-grade optical polish. However, success depends on using the correct polishing techniques and equipment.
All features
Model Part Number
GP14003
Brand
Glass Polish
Extended Product Information
FAQs
What kind of polisher do I need?
A dual-action or rotary polisher is recommended, with a speed range of 1500-2500 RPM.
Can I use this on my car's headlights?
Yes, but be careful not to damage the plastic. Test in an inconspicuous area first.
How much compound should I use?
Start with a small amount, about the size of a pea, and add more as needed.
What kind of polishing pad should I use?
A foam or microfiber pad is recommended for the final polishing stage.
How long should I polish each area?
Polish each area until the imperfections are removed, typically for a few minutes per section. Avoid over-polishing.
Can I use this on tinted windows?
Yes, but exercise caution. Test on a small area first to ensure it doesn't damage the tint.
Troubleshooting
Polishing leaves streaks or hazing.
Reduce the amount of compound used or try a different polishing pad. Ensure the surface is thoroughly cleaned after polishing.
Polishing not removing scratches.
The scratch may be too deep. This compound is best for fine scratches and imperfections. Consider a more aggressive compound for deeper scratches.
Polisher is vibrating excessively.
Check the polishing pad for balance and make sure it is securely attached. Reduce the speed of the polisher.
Compound dries too quickly.
Work in smaller areas or apply a small amount of water to the pad to keep it moist.
Pros and Cons
Pros
Achieves a professional-grade optical polish.
Effective at removing various imperfections like scratches and stains.
Suitable for use on a wide variety of glass and other surfaces.
Ready-to-use formula simplifies the polishing process.
Optimized for best results in the final polishing stages.
Cons
Requires a polisher for use.
Results may vary depending on the severity of the damage and user skill.
Not suitable for extremely deep scratches.
Requires proper technique to avoid creating new imperfections.
Setup, Compatibility & Care
Equipment: You will need a polisher, polishing pads, and the Glass Polish compound.
Compatibility: This product is compatible with all glass types, including tempered, laminated, and mirrors. It's also suitable for use on stones, minerals, marble, ceramics, and metal surfaces.
Application: Apply a small amount of the compound to a polishing pad. Start with a low speed and increase as needed. Work in a cross-hatch pattern, overlapping each pass.
Care: After polishing, clean the surface with a glass cleaner to remove any residue.
Storage: Store in a cool, dry place. Keep the container sealed when not in use. Avoid freezing.