A modern, minimal, oval polished chrome knob with one hole fixing. This no-fuss pull knob has smoo...A modern, minimal, oval polished chrome knob with one hole fixing. This no-fuss pull knob has smooth, curved edges and a contemporary look. The knob has a high fixing centre at the back, allowing the bottom half of the oval front to be used as a pull. Ideal for upcycling / refurbishing home furniture, wardrobes, drawers or dressing tables. With only one hole fixing, this knob is an easy choice to replace existing hardware. These handles are sold individually, so the price displayed is for a single item. Measurements- 1 Fixing Hole (distance between screw holes)- 40mm Length- 18mm Width- 20mm Projection This pull handle is made from zinc with a polished chrome finish. Installation Each handle is supplied with two M4 x 25mm fixing screws and is easy to install. If your door/drawer already has a handle or knob fixing, you may be able to unscrew the current pull and replace it using the existing hole(s). If this is your aim, make sure to choose new handles with the same size hole centres (distance between screws). If no holes are present, a small hole(s) will need to be drilled into your door or drawer to suit the chosen hardware. Once drilled, simply attach the handle/knob to the screws through the holes and tighten with a screwdriver.
This guide is for DIY enthusiasts and homeowners looking to refresh furniture. The Handle & Home Oval Cabinet Knob offers a modern, minimal aesthetic and an easy one-hole fixing for a quick upgrade. A potential caveat is the need to match existing hole centers for seamless replacement.
All features
Colour
Silver
Model Part Number
HH5797PCK
Brand
Handle & Home
Extended Product Information
FAQs
What material is the knob made of?
The knob is made from zinc with a polished chrome finish.
How many screws are included?
Each handle is supplied with two M4 x 25mm fixing screws.
Can I use this to replace a two-hole handle?
No, this knob is designed for a single hole fixing. It cannot directly replace hardware that requires two mounting screws unless you are willing to drill new holes.
What are the exact dimensions of the knob?
The knob has a length of 18mm and a width of 20mm. The fixing hole center is 40mm, though this is for its own single-hole design, not for matching pre-existing two-hole spacings.
How do I clean the polished chrome finish?
Use a soft, damp cloth. For tougher marks, a mild soap solution can be used, followed by drying with a clean cloth. Avoid abrasive cleaners.
Are these handles sold in sets?
No, these handles are sold individually, meaning the price displayed is for a single item.
What is the recommended use for this knob?
It is ideal for upcycling or refurbishing home furniture such as wardrobes, drawers, or dressing tables.
Troubleshooting
Knob is loose after installation
Ensure the M4 screws are fully tightened. If the hole in the furniture is stripped, consider using a slightly larger screw or wood filler to secure it.
Screw won't go in or tighten
Check that the screw is properly aligned with the thread in the knob. Ensure no debris is obstructing the screw hole. Verify you are using the correct M4 screw size.
Chrome finish appears dull or tarnished
Clean the knob with a soft, damp cloth and mild soap. Rinse with clean water and dry thoroughly with a soft cloth. Avoid abrasive cleaning agents.
Pros and Cons
Pros
Easy to install with a single fixing point.
Modern and minimalist design suits contemporary interiors.
Durable zinc construction with a polished chrome finish.
Versatile for various furniture types including wardrobes and drawers.
Enhances the look of upcycled or refurbished items.
Cons
Requires a single hole to be present or drilled.
May not be suitable for traditional or ornate furniture styles.
Hole center distance must match existing hardware for direct replacement.
Sold individually, potentially increasing cost for multiple units.
Setup, Compatibility & Care
Setup:
Preparation: Ensure the surface of your furniture is clean and free from dust.
Hole Alignment: If replacing existing hardware, align the new knob with the existing hole(s). For new installations, measure and mark the desired location, then drill a single hole appropriate for the M4 screw size.
Attachment: Insert the provided M4 x 25mm screws through the back of the furniture piece and into the knob's fixing point.
Tightening: Use a screwdriver to firmly tighten the screws until the knob is secure, being careful not to overtighten.
Compatibility:
This knob requires a single hole fixing.
The internal screw thread is designed for M4 screws.
Ensure the distance between any existing screw holes matches the 40mm hole center measurement if replacing handles with multiple fixing points (though this knob is single-point).
Care:
Clean with a soft, damp cloth.
Avoid using abrasive cleaners or harsh chemicals, as these can damage the polished chrome finish.
For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, dry cloth.