Best current price£8.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.79Visit shop B&Q - Sanding Belts 40mm X 305mm Belt Sander 40 Grit Abrasive Aluminum Oxide For Grinding Sharpening Derusting Wood 10X
Visit shop1 offer from £8.79
View price history by clicking the chart icon.
The Dapetz 40 x 305mm Sanding Belts are designed for woodworkers, metalworkers, and DIY enthusiasts who require aggressive, high-efficiency material removal. These 40-grit belts are built to handle heavy-duty surface preparation tasks with ease; however, due to their coarse grit, they are best suited for initial stock removal rather than fine surface finishing.
| Model Part Number | DP01415 |
|---|---|
| Brand | Dapetz |
No. At 40 grit, these are classified as coarse and are intended for aggressive material removal, not for achieving a smooth, paint-ready finish.
These belts are specifically designed for the Bosch GVS 350 AE. You should check your specific sander's manual to ensure it accepts 40mm x 305mm belts.
Each pack contains 10 individual sanding belts.
Yes, these belts are durable enough to be used on metal for tasks like rust removal and smoothing sharp edges.
You can use a rubber abrasive cleaning stick to remove built-up debris from the belt surface, which will help restore its cutting efficiency.
Check the belt tracking adjustment screw on your sander to ensure the belt is properly aligned on the center of the rollers.
Ensure you are not applying excessive downward pressure, as this causes overheating and belt failure.
Check that the belt is fully seated on the rollers and that there is no debris trapped between the belt and the sander platform.
These belts are specifically designed for the Bosch GVS 350 AE belt sander. To install, ensure the tool is unplugged. Release the belt tension lever, slide the old belt off, and position the new belt over the rollers, ensuring it is centered. Engage the tension lever and check that the tracking is correct by manually rotating the belt before powering the tool on. To maximize belt life, store them in a cool, dry place to prevent the adhesive from degrading. Avoid using these belts on wet surfaces, as moisture can compromise the integrity of the abrasive bonding.
