WalkingPad Treadmill R2 Pro - KINGSMITH

The WalkingPad R2 Pro has a maximum speed of 7.5 mph (12 km/h).

The treadmill is powered via a standard electrical outlet using the included power adapter.

Yes, you can control basic functions like start, stop, and speed adjustment using the included remote control. The app provides additional features like detailed tracking and mode customization.

The WalkingPad R2 Pro supports a maximum user weight of 110 kg (approximately 242 lbs).

Auto mode utilizes FootSense technology, adjusting the speed based on your position on the treadmill belt. Moving towards the front typically increases speed, while moving towards the back may decrease it.

Minimal assembly is typically required. The main components are pre-assembled, and you may only need to attach the handrail or set up the phone holder.

The folded dimensions are designed for compact storage, typically allowing it to fit under low furniture or stand upright in narrow spaces. Refer to the product specifications for exact folded dimensions.

Ensure the power cord is securely connected to both the treadmill and a working electrical outlet. Check if the power switch is in the 'on' position.

Check the belt tension and alignment. It may require tightening or centering. Refer to the user manual for specific instructions on belt adjustment. Ensure the belt is adequately lubricated.

Ensure the FootSense technology sensors are clean and unobstructed. Try recalibrating the mode through the KS Fit app or by following specific reset instructions in the manual.

Verify that Bluetooth is enabled on your mobile device. Ensure the treadmill is powered on and within range. Try restarting both your device and the treadmill, then attempt to re-pair.

Check for any foreign objects on or under the belt. Inspect the belt for wear or damage. Ensure all screws and bolts are tightened. If noise persists, contact customer support.