HP LaserJet MFP M140we - White

Follow the setup instructions on the LCD screen or use the HP Smart app. The app will guide you through the process of connecting to your Wi-Fi network.

The HP LaserJet MFP M140we uses HP 142A Black LaserJet Toner Cartridge.

No, this is a monochrome printer and only prints in black.

Place the document on the flatbed scanner glass, close the lid, and use the HP Smart app or printer software to initiate a scan. You can then save or share the scanned document.

The printer supports A4, A5, A6, and C5 sizes, as well as custom sizes.

HP+ is a smart printing system that keeps your printer up to date, secure, and ready to print from virtually anywhere. It requires an HP account, an internet connection, and the exclusive use of Original HP Toner.

Gently wipe the scanner glass with a soft, lint-free cloth dampened with water or a glass cleaner. Be careful not to scratch the surface.

The HP LaserJet MFP M140we comes with a two-year limited warranty. Refer to the documentation in the printer box for further information on the HP warranty.

Check the power cable connection and ensure it is securely plugged into both the printer and the power outlet. Try a different outlet to rule out any power supply issues.

Verify the printer is connected to the Wi-Fi network and that the Wi-Fi signal is strong. Restart the printer and your router. Reinstall the printer drivers if necessary.

Ensure you are using Original HP Toner cartridges. Clean the print cartridge contacts and the scanner glass. Check the paper type settings in the printer driver and adjust as needed.

Carefully remove any jammed paper, ensuring no torn pieces remain inside the printer. Check the paper type and ensure it is compatible. Fan the paper before loading it into the tray.

Ensure the printer and mobile device are connected to the same Wi-Fi network. Check that the printer is AirPrint or Mopria enabled. Restart both devices and try again.