Best current price£52.15from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£52.15Visit shop Eltako 21110002 ES12-110 Impulse Switch 230V AC/DC 16A DIN Rail Mount
Visit shop17 offers from £52.15 - £124.84
View price history by clicking the chart icon.
2 offers from £32.71 - £36.16
View price history by clicking the chart icon.
The Eltako ESR61NP is an electronic latching relay designed for electrical control applications, particularly for recessed and surface mounting. It offers a single, non-potential-free contact capable of switching 16A at 250V, making it suitable for controlling lighting and other electrical loads. Its key benefit lies in its energy efficiency, featuring no standby power consumption and zero-voltage switching. However, users should note that its control voltage is not potential-free, requiring careful wiring.
| Series | ESR61NP |
|---|---|
| Model Part Number | 61100001 |
| Brand | Eltako |
The ESR61NP can switch a maximum of 16A at 250V. This translates to approximately 2000W for incandescent lamps and 1000VA for fluorescent lamps.
Yes, the ESR61NP can be controlled by signals ranging from 8V DC to 230V AC/DC, offering flexibility in control source selection.
Release delay refers to the time the relay stays energized after the control signal is removed. The ESR61NP allows you to set this delay for up to 120 minutes.
No, the ESR61NP's contact is not potential-free. This means the switching circuit shares a common reference with the supply voltage, and wiring must account for this.
Zero-voltage switching ensures that the relay contacts close or open when the AC voltage waveform crosses zero. This minimizes electrical noise and extends the life of the contacts.
Yes, the delay time can be deactivated, allowing the relay to function as a standard surge current switch (without glow lamp current).
Please refer to the product documentation or the retailer for specific warranty information, as it can vary.
Verify the supply voltage is present (230V AC/DC). Check the control input wiring and ensure the control signal is within the 8-230V range. Confirm the relay is not in a deactivated state.
Check the time setting adjustment. Ensure the delay function is not deactivated. Verify that the control signal is no longer present after the intended ON period.
Ensure all connections are secure. Check for any interference on the control lines. Verify the supply voltage is stable and within the specified range.
Confirm the release delay function is correctly set. If the relay is stuck, try cycling the power. If the issue persists, the relay may need replacement.
Setup: The ESR61NP is designed for installation in electrical switch boxes, either for flush mounting (plaster) or surface mounting. Ensure the power supply is disconnected before commencing any installation work.
Compatibility: This relay is compatible with standard 230V AC mains power. It can be controlled by push-buttons or other switches providing a 230V AC or 8-230V DC signal. Ensure the connected load does not exceed the specified ratings (16A / 250V).
Care: The ESR61NP requires minimal maintenance. Keep the device clean and free from dust. Ensure adequate ventilation around the unit. No user-serviceable parts are inside; consult a qualified electrician for any repairs.
