Kenable Ethernet Cable - CAT7

CAT7 cables offer significantly higher bandwidth (600MHz vs 250MHz) and support faster data transfer speeds (10,000 Mbit/s vs 1,000 Mbit/s) compared to CAT6. CAT7 also features improved shielding for better interference protection.

Yes, to achieve the maximum 10,000 Mbit/s speeds, both your network devices (e.g., router, switch, computer) must be equipped with CAT7 or higher ports and hardware. However, the cable will still function at lower speeds with older equipment.

Yes, this CAT7 cable is ideal for 4K TVs, providing the necessary bandwidth for smooth, high-resolution streaming without buffering.

Absolutely. The high speed and low latency provided by this CAT7 cable can improve online gaming performance, reducing lag and ensuring a more stable connection.

It means the cable has an overall foil shield protecting all the wires, plus individual foil shields around each pair of twisted wires. This provides superior protection against electromagnetic interference (EMI) and crosstalk.

Yes, the full copper strands in this CAT7 cable make it suitable for PoE applications, allowing it to transmit both data and electrical power to compatible devices like access points or security cameras.

These cables are available in a range of lengths to suit different installation needs.

Verify that both ends of the cable are securely plugged into the correct ports. Check that the network ports on both devices are active. Try a different Ethernet cable to rule out a faulty cable. Ensure your router and modem are functioning correctly.

Confirm that both connected devices and your network infrastructure (router, switch) support CAT7 speeds. Check for physical damage to the cable, such as kinks or cuts. Ensure the cable is not excessively long, as very long runs can degrade performance. Test with a shorter, known-good cable.

This is normal for shielded cables like CAT7. Avoid forcing the cable into tight bends, as this can damage the internal shielding and conductors. Route the cable carefully to avoid strain.

Ensure the network switch or injector is providing PoE and is configured correctly. Verify that the connected device is PoE compatible. Test the cable with a non-PoE device to confirm data transmission.