Kenable Ethernet Lan Cable - Cat6a - 10M - White

This Cat6a cable supports data transfer rates of up to 10,000 Mbit/s (10 Gbps).

Yes, Cat6a cables are backward compatible and will work with Cat6, Cat5E, and Cat5 devices, although speeds will be limited by the older standard.

The flat design (2.2mm thick, 7.2mm wide) is for easier and more discreet routing, allowing it to be run under carpets, along walls, or in tight spaces without being noticeable or creating a tripping hazard.

S/FTP (Screened/Foiled Twisted Pair) means that each individual pair of wires inside the cable is shielded with foil, and the entire bundle of pairs is also covered by an overall foil screen. This provides maximum protection against crosstalk and electromagnetic interference.

This cable is designed for indoor use. Outdoor use can expose it to elements that degrade the materials and compromise performance and safety.

The cable features high-grade pure copper stranded conductors (32AWG).

For the cable itself, a dry or slightly damp cloth can be used. Ensure connectors remain dry. Avoid using harsh chemicals.

Ensure both ends of the cable are securely plugged into the correct ports. Try a different port on your router or switch. Test the cable with another device to rule out a device issue. Check if the cable is physically damaged.

Verify that the cable is fully Cat6a compliant and not damaged. Check for interference from other electronic devices or power cables. Ensure the connected devices and network infrastructure support the desired speeds (e.g., Gigabit or 10 Gigabit).

Visually inspect the entire length of the cable for any signs of physical damage, cuts, or severe kinks. If damage is found, the cable should be replaced as its performance and shielding integrity may be compromised.

Ensure the RJ45 clip on the connector is not broken. Gently check if there is any obstruction within the port or on the connector. If the clip is damaged, the cable may need replacement.