Kenro Hand Held Fog Machine Kit - 30W

This machine is designed to work with Kenro's specifically formulated VG/PG fog fluid. Using other fluids may damage the unit and void the warranty.

Battery life varies depending on usage intensity. For optimal performance, it is recommended to recharge after significant use or before extended shooting sessions.

Yes, the fog produced is fine and odour-free, making it suitable for indoor use. However, ensure adequate ventilation and be mindful of the space requirements.

After use, run the machine with distilled water for 10-15 seconds to flush the system. Wipe the exterior with a dry cloth. Do not immerse in water.

The machine delivers 20 cubic metres per minute of fog, suitable for localized effects and smaller areas. It is not designed for large venue coverage.

The remote control is designed for convenient on-location use. Specific range details are not provided, but it is intended for typical small to medium shooting environments.

The machine requires a brief warm-up period after being turned on before it can produce fog. This ensures optimal performance and mist quality.

Ensure the battery is charged. Connect to a power source via USB-C and check if the charging indicator lights up. Try a different USB-C cable or power adapter.

Check the fluid level and refill if necessary. Ensure the correct fog fluid is being used. Allow the machine to fully warm up. Check the nozzle for blockages and clean if required. Run a cleaning cycle with distilled water.

The auto shut-off protection may have engaged due to overheating or low battery. Allow the device to cool down completely and ensure it is adequately charged before the next use.

This may indicate the use of incorrect fluid or residue build-up. Flush the system with distilled water and refill with the recommended Kenro VG/PG fog fluid. Ensure the fluid reservoir is clean.