Setup, Compatibility & Care
To set up, ensure your pump model is either a 6000, 8000, 12000, or 15000 series Aquaforce. Locate the secondary inlet cap on your pump housing, remove it, and connect the satellite intake hose leading to the strainer cage. For regular maintenance, remove the cage from the water periodically to clear away debris, leaves, or algae that may have accumulated on the exterior mesh. If using the 2mm wildlife protection inserts, clean them more frequently, as the smaller apertures are more susceptible to clogging from fine organic matter. Always unplug the pump from the electrical source before performing any maintenance or adjustments to the cage assembly.