3d Wall Panels Sparkling Glitter Elements - Grey Plain
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
NOVECRAFTO 3D Wall Panels with Sparkling Glitter Elements are designed for DIY enthusiasts looking to add a modern, textured, and visually appealing upgrade to their interior spaces, such as kitchens or any other room. The key benefit is their easy installation and the ability to cover wall imperfections with a durable, attractive finish. A caveat to consider is that adhesive is not included and must be purchased separately. These panels offer a tile-like appearance with a sparkling feature, are made from waterproof and fire-resistant PVC, and are easy to maintain.
All features
| Brand | Novecrafto |
|---|
Extended Product Information
FAQs
Are these panels suitable for a shower area?
While the panels are waterproof and moisture-resistant, they are primarily recommended for walls and splashbacks, not for direct immersion in water or areas with constant high humidity like shower enclosures. Ensure good ventilation if used in a high-moisture bathroom.
What type of adhesive should I use?
The product recommends using high-quality construction adhesive suitable for wall panels, such as Instant Nails Glue or similar strong bonding agents. Always follow the adhesive manufacturer's instructions for application and curing times.
Can I install these panels over existing wallpaper?
It is not recommended to install directly over wallpaper, especially if it is loose, peeling, or textured. For best adhesion, remove old wallpaper and ensure a clean, smooth, and stable surface.
How do I clean the sparkling glitter elements?
The sparkling elements are integrated into the material. Clean gently with a soft, damp cloth. Avoid scrubbing or using abrasive cleaners, which could scratch or dislodge the glitter.
Are these panels heat-resistant?
The panels are fire-resistant, which offers a degree of safety. However, they are not designed to withstand direct, prolonged contact with high heat sources like an open flame or the back of an unshielded high-wattage heater.
What is the weight of the panels?
Each panel weighs approximately 6.61 pounds. This weight should be considered when selecting your adhesive to ensure a secure bond.
Can these panels be painted?
These panels are designed with a finished texture and sparkling elements. Painting is not recommended as it may obscure the design and potentially affect the material's properties.
Troubleshooting
Panels not adhering properly
Ensure the wall surface is thoroughly cleaned, dried, and free of any grease or dust. Verify that the correct type and amount of high-quality construction adhesive are being used, and apply even pressure when mounting. For very porous surfaces, pre-treating might be necessary.
Difficulty cutting panels for edges or outlets
Use a sharp utility knife or a fine-tooth saw designed for plastic. Measure carefully and make multiple light passes rather than one forceful cut to achieve a clean edge. Always wear appropriate safety gear.
Uneven appearance after installation
Check for proper alignment of panels during installation. Ensure that no gaps are left between panels. Small adjustments can sometimes be made immediately after application before the adhesive fully cures.
Sparkle elements appear to be fading or falling off
This is unlikely with normal use. Ensure you are cleaning the panels with a soft damp cloth and avoiding abrasive materials or harsh chemicals that could damage the surface.
Pros and Cons
Pros
- Easy DIY installation saves on professional labor costs.
- Waterproof and moisture-resistant properties make them suitable for kitchens and bathrooms.
- Durable PVC material ensures a long-lasting finish.
- Hides existing wall imperfections effectively.
- Sparkling elements add a unique decorative touch.
- Fire-resistant for added safety.
Cons
- Adhesive is not included and must be purchased separately.
- Requires careful surface preparation for optimal adhesion.
- May not be suitable for heavily textured or uneven walls without extra preparation.
- The 3D effect might be less pronounced from extreme angles.
- Initial cost per panel might be higher than traditional wallpaper.
Setup, Compatibility & Care Instructions
Setup: Ensure the wall surface is clean, dry, and free from dust and grease. For best results, a smooth surface is recommended. Prepare your preferred high-quality construction adhesive (e.g., Instant Nails Glue or similar). Apply the adhesive evenly to the back of each panel, following the adhesive manufacturer's instructions. Firmly press each panel against the wall, ensuring good contact. Work methodically, aligning panels as you go.
Compatibility: These panels are designed for direct glue-on application to most smooth interior wall surfaces, including drywall, plaster, and existing tiles (ensure existing tiles are well-adhered and clean). Not recommended for use on wallpaper or peeling paint.
Care: Cleaning is straightforward. Use a soft, damp cloth to wipe away dirt, dust, and stains. For tougher marks, a mild detergent can be used, followed by a rinse with a clean damp cloth. Avoid abrasive cleaners or scouring pads, as they can damage the textured surface and glitter elements.