Mylands Pure White No.1 Multi-Surface Primer and Undercoat - White - 5 Litre

No, this is specifically formulated as a primer and undercoat. It requires a topcoat of paint to provide the necessary protection and desired finish.

Please check the specific label on your container, as Mylands products are often formulated for high-performance and may vary by specific series.

Drying times can vary based on temperature and humidity, but it is generally recommended to wait until the primer is touch-dry and firm, typically 2-4 hours, before overcoating.

It is best suited for wood and plaster, but for metal, ensure you use a dedicated metal primer first if the manufacturer specifies, or test on a small inconspicuous area.

Usually one coat is sufficient for most surfaces, but if you are covering a very dark color or a highly porous material, two coats will provide a better result.

Ensure you are using a high-quality synthetic brush and avoid over-working the paint while it is drying.

The surface may be too smooth or contaminated. Lightly sand the area and clean with sugar soap before reapplying.

Allow the first coat to fully cure and apply a second thin, even layer of primer to achieve complete opacity.