This T-tap wrench set is designed for use with taps and can also be used for square handle tools s...This T-tap wrench set is designed for use with taps and can also be used for square handle tools such as reamers and screw pullers. It is also a very good choice for household use. The set includes 1 pc T-handle tap wrench, overall length 80mm/ 3.15in, height 60mm/ 2.37in, and 1x M3x 0.5 Tap, 1x M4x 0.7 Tap, 1x M5x 0.8 Tap, 1x M6x 1 Tap, 1x M8x1.25 Tap. The tap wrench holder is made of high-speed steel material, and the taps are made of bearing steel material, ensuring durability, stronger stability, and long-term service life. The T-shaped wrench can be adjusted in angle and direction, perfect for various scenarios. The rubber part ensures no slippage during use and promotes perfect processing results. How to Use: 1. Insert the taper part first and make sure the centerline of the tap is the same as the centerline of the hole. 2. Rotate the tap wrench with even force to feed the wire, no need to add more force after feeding. 3. Each time you rotate the tap chip, reverse the rotation about 45 degrees to avoid blockage. 4. If you have difficulty in rotating the tap, stop adding force, otherwise, the tap will be broken. Place the square handle of the tap into the reamer and tighten the reamer. The drill can be perfectly matched to the reamer. Also, you can equip it to drills and other machines. Tap Size: M3, M4, M5, M6, M8 (Tapping On: Aluminum, wood, plastic and other soft material) Overall Length: 68mm/ 2.68inch, 64mm/ 2.52inch, 62mm/ 2.44inch, 54mm/ 2.13inch, 52mm/ 2.05inch Working Length: 30mm/ 1.18inch, 27mm/ 1.07inch, 23mm/ 0.91inch, 19mm/ 0.75inch, 21mm/ 0.83inch.
This T-tap wrench set is designed for use with taps and can also be used for square handle tools such as reamers and screw pullers. It is also a very good choice for household use. The set includes 1 pc T-handle tap wrench, overall length 80mm/ 3.15in, height 60mm/ 2.37in, and 1x M3x 0.5 Tap, 1x M4x 0.7 Tap, 1x M5x 0.8 Tap, 1x M6x 1 Tap, 1x M8x1.25 Tap. The tap wrench holder is made of high-speed steel material, and the taps are made of bearing steel material, ensuring durability, stronger stability, and long-term service life. The T-shaped wrench can be adjusted in angle and direction, perfect for various scenarios. The rubber part ensures no slippage during use and promotes perfect processing results. How to Use: 1. Insert the taper part first and make sure the centerline of the tap is the same as the centerline of the hole. 2. Rotate the tap wrench with even force to feed the wire, no need to add more force after feeding. 3. Each time you rotate the tap chip, reverse the rotation about 45 degrees to avoid blockage. 4. If you have difficulty in rotating the tap, stop adding force, otherwise, the tap will be broken. Place the square handle of the tap into the reamer and tighten the reamer. The drill can be perfectly matched to the reamer. Also, you can equip it to drills and other machines. Tap Size: M3, M4, M5, M6, M8 (Tapping On: Aluminum, wood, plastic and other soft material) Overall Length: 68mm/ 2.68inch, 64mm/ 2.52inch, 62mm/ 2.44inch, 54mm/ 2.13inch, 52mm/ 2.05inch Working Length: 30mm/ 1.18inch, 27mm/ 1.07inch, 23mm/ 0.91inch, 19mm/ 0.75inch, 21mm/ 0.83inch.