This slim CAT6 cable meets all Category 6 patch cable specifications to deliver a reliable Gigabit...This slim CAT6 cable meets all Category 6 patch cable specifications to deliver a reliable Gigabit and Power over Ethernet (PoE) network connection in high-density network installations. Improved Airflow The Slim Cat6 Patch Cord is 36% thinner than standard Cat6 Ethernet cables, enabling greater airflow and heat dissipation in confined spaces. The Slim Cat6 Ethernet cable is also more flexible, for easier cable routing in crowded network racks and patch panels. This cable features snagless connectors that protect the RJ45 clips during installation, reducing snags or breakage when routing through narrow gaps or in between devices. Durable Construction The Slim Cat6 Cable features 50-micron gold RJ45 contacts that ensure a precise fit to minimize wear and signal loss. The 4-pair Unshielded Twisted Pair (UTP) construction utilizes 28AWG Pure Bare Copper Wire for improved conductivity and low resistance. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered. Tested for Reliability The Slim CAT6 patch cable is tested to comply with ANSI/TIA 568 C.2 requirements for guaranteed Cat6 performance. The cable is Fluke Tested to ensure minimal Near-End Crosstalk (NEXT) and Retun Loss (RL). Reliably deliver up to 90W of PoE++ to power a remote networking devices, including PoE switches and boardroom cameras. This Slim Cat6 Patch Cable complies with IEEE 802.3bt Type 4 PoE++ specifications.
Startech 15M Yellow Slim Cat6 Ethernet Cable Snagless Rj45 Utp Lszh 28Awg Pure BFree delivery in 1–3 days£20.15Visit shop →
Product Information
Full details
This StarTech.com Slim CAT6 Ethernet Cable is designed for IT professionals and network installers requiring reliable Gigabit Ethernet and Power over Ethernet (PoE) connectivity in high-density environments. Its key benefit is enhanced airflow and flexibility due to its 36% slimmer profile compared to standard Cat6 cables, allowing for easier routing and better heat dissipation in crowded racks. A potential caveat is that while it supports up to 100W of PoE++, users should verify their specific PoE device and power source compatibility.
All features
Series
Slim CAT6
Model Part Number
N6PAT15MYLS
Brand
StarTech.com
Extended Product Information
FAQs
What is the main advantage of a 'slim' Cat6 cable?
The primary advantage is its significantly reduced diameter (36% thinner than standard Cat6), which allows for better airflow, easier routing in dense environments, and improved heat dissipation in network racks.
Does this cable support Power over Ethernet (PoE)?
Yes, this cable supports PoE++ (IEEE 802.3bt Type 4), capable of delivering up to 100W of power. Ensure your power sourcing equipment and powered device are also compatible with PoE++ standards.
Is this cable shielded?
No, this is an Unshielded Twisted Pair (UTP) cable. It is designed for environments where high levels of electromagnetic interference (EMI) are not a primary concern.
What does LSZH mean for the jacket material?
LSZH stands for Low Smoke Zero Halogen. This means that in the event of a fire, the cable jacket is designed to emit very little smoke and no toxic halogenated compounds, making it safer for use in poorly ventilated areas.
How do I know if my devices are compatible with the 100W PoE++ capability?
Check the specifications of your power sourcing equipment (PSE) and your powered device (PD). Both must explicitly state support for IEEE 802.3bt Type 4 (PoE++) or 4PPoE to reliably utilize up to 100W.
What is the data transfer rate supported by this Cat6 cable?
This Cat6 cable supports data transfer rates of up to 1000 Mbit/s (Gigabit Ethernet) and operates at frequencies up to 250 MHz, meeting all Category 6 specifications.
Are the connectors snagless?
Yes, the cable features snagless connectors. This means the RJ45 clip is protected by the connector housing, reducing the likelihood of snagging or breaking the clip during installation or removal.
Troubleshooting
No network connection or intermittent connectivity
Ensure both RJ45 connectors are fully seated in their ports. Check that the cable is not damaged (bent, cut, or kinked). Verify that the network devices at both ends are powered on and functioning correctly. Test with a known working cable to rule out the StarTech.com cable as the issue.
Slow network speeds
Confirm that both connected devices support Gigabit Ethernet (1000Base-T). Ensure the cable is properly Cat6 rated and undamaged. Check network switch port configuration and overall network traffic.
PoE device not powering on or receiving insufficient power
Verify that the power source (e.g., PoE switch) supports PoE++ (IEEE 802.3bt Type 4) and can deliver the required wattage. Ensure the connected device is also PoE++ compliant and requires no more than the available power. Check the cable for any damage that might impede power delivery.
Cable is difficult to route despite being 'slim'
While slimmer and more flexible than standard cables, network conditions or existing infrastructure may still pose routing challenges. Avoid tight, sharp bends (less than the minimum bend radius specified for Cat6) which can impact performance.
Pros and Cons
Pros
Significantly improves airflow and reduces heat in dense network environments.
Easier to manage and route due to its slim and flexible profile.
Supports high-speed Gigabit Ethernet and advanced PoE++ standards.
Durable construction with gold-plated connectors ensures reliable connections.
LSZH jacket offers enhanced safety in case of fire.
Cons
Requires verification of specific PoE device and power source compatibility for full 100W utilization.
The yellow color might not fit all aesthetic requirements for visible network runs.
While flexible, extreme bending should still be avoided to maintain signal integrity.
Setup, Compatibility & Care
Setup:
Connection: Connect one RJ45 connector to your network device (e.g., switch, router, computer) and the other to its network counterpart.
Routing: Gently guide the cable through your desired path, utilizing its flexibility for tight spaces. Avoid sharp bends or kinks.
PoE Verification: If using PoE, ensure both the power source (e.g., PoE switch) and the powered device (PD) support IEEE 802.3bt Type 4 (PoE++) standards for up to 100W delivery. The cable itself is rated for this, but the end devices must be compatible.
Compatibility:
Network Standards: Backward compatible with 10/100Base-TX Fast Ethernet and 1000Base-T Gigabit Ethernet.
PoE Standards: Fully compliant with IEEE 802.3bt Type 4 (4PPoE), supporting up to 100W.
Connectors: Standard RJ45 connectors ensure compatibility with most network equipment. The snagless boot protects the RJ45 clip.
Care:
Cleaning: Use a dry or slightly damp soft cloth to clean the exterior of the cable. Avoid harsh chemicals or solvents.
Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures (-20°C to 60°C). Ensure cables are not stored under heavy weight, which could deform them.
Handling: While the snagless connectors protect the clips, handle connectors with care. Avoid excessive force when plugging or unplugging.