Facom Slim Metric Combination Spanner - 32mm

The OGV® profile is a specific design on the ring end of the spanner that provides more effective contact with the flats of a nut or bolt. This leads to better torque transmission, a reduced risk of slipping, and a longer service life for both the tool and the fastener.

The 15° offset on the ring end provides clearance, protecting your fingers from hitting the work surface and allowing for more comfortable and safer operation, especially when working on flat surfaces.

The 15° offset flat handle reduces the angle needed to reposition the wrench when working in confined spaces. This means you can turn the fastener with less movement of your wrist and arm.

No, this is a combination spanner specifically designed for 32mm metric nuts and bolts. It features both an open-end and a 12-point ring end for optimal use on standard hexagonal fasteners.

The slim design allows the spanner to access fasteners in very tight or restricted areas where a bulkier tool would not fit.

Keep the spanner clean and dry. Wipe it with a cloth after use and store it in a dry place. The finish provides good corrosion resistance, but avoid prolonged exposure to moisture.

Facom generally offers a lifetime warranty against manufacturing defects on their hand tools. Please refer to the specific warranty documentation provided with your purchase for full details.

Ensure the spanner is fully seated on the fastener and that the fastener size is correct (32mm). Check the OGV® profile for wear. Clean both the spanner and fastener of any debris or lubricant.

Utilize the 15° offset of the ring and handle to gain better leverage and clearance. The slim design is intended for tight spots; try different angles of approach.

Clean the affected area with a mild degreaser and a soft cloth. For minor surface rust, a brass brush can be used gently. Ensure the tool is dried thoroughly and stored in a dry place. For significant corrosion, discontinue use.