NIIMBOT B1 Label Maker - 2 Inch Bluetooth Portable

The NIIMBOT B1 supports label widths ranging from 20 mm to 50 mm.

No, the NIIMBOT B1 is a thermal label printer and does not require any ink or toner. It uses heat to print on special thermal paper.

The NIIMBOT B1 primarily connects via Bluetooth to mobile devices (iOS and Android) using the NIIMBOT app. Computer connectivity is not a standard feature for this model.

Battery life can vary depending on usage intensity and the duration of printing sessions. It is designed for portable use and typically lasts through moderate daily labeling tasks.

For best performance and to maintain print quality, it is recommended to use genuine NIIMBOT thermal label paper rolls.

Firmware updates are typically managed through the NIIMBOT app. Ensure your app is up-to-date and follow any prompts for firmware updates when connected to the label maker.

Thermal labels are generally water-resistant but not fully waterproof. Prolonged exposure to water or harsh environmental conditions may affect the print quality over time.

Check if the device is charged and powered on. Ensure Bluetooth is enabled and connected to the app. Verify that a label roll is properly loaded and that the protective film has been removed.

Restart both the label maker and your mobile device. Ensure Bluetooth is turned on. Try unpairing and re-pairing the device through the app.

Ensure you are using genuine NIIMBOT thermal labels. Clean the print head gently with a dry, lint-free cloth. Check if the label roll is nearly depleted, as quality can decrease.

Ensure there are no obstructions in the cutting area. Manually check if the cutting mechanism needs cleaning or if the blade is damaged (contact support if damaged).