Beats Studio Pro Wireless Headphones - Grey - Active Noise Cancellation

You can charge the headphones using the provided USB-C cable. Connect the cable to the charging port on the headphones and to a compatible USB power adapter or port.

Battery life varies with usage, but you can expect up to 40 hours of listening time with ANC off and up to 24 hours with ANC on.

Yes, you can typically use the headphones while they are charging via the USB-C cable.

To reset, press and hold the power button and the volume down button simultaneously for 15 seconds until the LED indicator flashes. Refer to the official Beats support documentation for exact steps.

The Beats Studio Pro are not rated as sweat or water-resistant. It is recommended to keep them dry and avoid exposure to moisture.

Active Noise Cancellation (ANC) blocks out external noise for immersive listening. Transparency mode allows external sounds to be heard clearly, useful for conversations or situational awareness, without removing the headphones.

Ensure the headphones are adequately charged. Connect them to a power source for at least 15 minutes and try again. Check if the power button is being pressed correctly.

Verify that the headphones are connected via Bluetooth and selected as the audio output device. Increase the volume on both the headphones and the connected device. Check if the ANC is interfering; try toggling it off.

Turn off Bluetooth on your device and then turn it back on. Restart the headphones and try pairing again. If problems persist, reset the headphones by following the manufacturer's instructions for a factory reset and re-pair.

Ensure the earcups create a good seal around your ears. Check for any debris that might be blocking the ANC microphones. Firmware updates can sometimes improve ANC performance; check for available updates via the Beats app.